It is often necessary to "break in" into boards bootloader commandline if something fails or even for development purposes some parameters have to be changed.
So we enable u-boot's CONFIG_NETCONSOLE feature. We also modify Networksettings to apply with this new use-case.
Signed-off-by: Hannes Petermaier oe5hpm@oevsv.at
--- Changes for V2: None --- include/configs/bur_am335x_common.h | 23 +++++++++++++++++++++-- include/configs/tseries.h | 33 ++++----------------------------- 2 files changed, 25 insertions(+), 31 deletions(-)
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index e9d5d01..d7ea1c9 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -12,6 +12,23 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ +#define BUR_COMMON_ENV \ +"defaultip=192.168.60.253\0" \ +"defaultsip=192.168.60.254\0" \ +"netconsole=echo switching to network console ...; " \ +"if dhcp; then " \ +"setenv ncip ${serverip}; else " \ +"setenv ncip 192.168.60.254; " \ +"setenv serverip 192.168.60.254; " \ +"setenv gatewayip 192.168.60.254; " \ +"setenv ipaddr 192.168.60.1; " \ +"fi;" \ +"setenv netdisplay0 '" \ +"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \ +"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip};'" \ +"run netdisplay0; " \ +"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" + #define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_AM33XX @@ -47,7 +64,7 @@ #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 4 +#define CONFIG_NET_RETRY_COUNT 2 #define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ @@ -57,7 +74,9 @@ #define CONFIG_SPL_NET_SUPPORT #define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */ #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" - +/* Network console */ +#define CONFIG_NETCONSOLE 1 +#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 986db3f..8e073e0 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -125,35 +125,10 @@
#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=0\0" \ - "loadaddr=0x80200000\0" \ - "bootfile=zImage\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "rootpath=/tftpboot/tseries/rootfs-small\0" \ - "nfsopts=nolock\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "run netargs; " \ - "bootm ${loadaddr}\0" \ - "usbupdate=echo Updating UBOOT from USB-Stick ...; " \ - "usb start; " \ - "fatload usb 0 0x80000000 updateubootusb.img; " \ - "source;\0" \ - "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ - "setenv autoload 0; " \ - "dhcp;" \ - "tftp 0x80000000 updateUBOOT.img;" \ - "source;\0" \ - NANDARGS \ - MMCARGS +BUR_COMMON_ENV \ +"autoload=0\0" \ +NANDARGS \ +MMCARGS #endif /* !CONFIG_SPL_BUILD*/
#define CONFIG_BOOTCOMMAND \