Dear Michal Simek,
On 09/13/2012 11:35 AM, Marek Vasut wrote:
Dear Michal Simek,
[...]
+int board_init(void) +{
- icache_enable();
Uh oh ... isn't this on by default when CONFIG_ICACHE_OFF isn't present?
Will check this one.
- return 0;
+}
+int board_late_init(void) +{
- return 0;
You don't need this.
Will check it too.
+}
+#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{
- int ret = 0;
+#if defined(CONFIG_ZYNQ_GEM) && defined(CONFIG_ZYNQ_GEM_BASEADDR0)
- ret |= zynq_gem_initialize(bis, CONFIG_ZYNQ_GEM_BASEADDR0);
ret |= ? ;-)
The reason is that I will wire axi_ethernet and ethernet lite drivers here too. If this is the problem I can fix it but the next patch will return it to this style.
Logical OR on signed type is wrong. Besides, if one fails, you don't want to init the others.
+#endif
- return ret;
+} +#endif
+int dram_init(void) +{
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
- return 0;
+}
+void reset_cpu(ulong addr) +{
- while (1)
;+}
This is definitelly CPU specific. [...]
Right, Moving to different folder make sense.
Directory, no wind blows here :p
Thanks, Michal
Best regards, Marek Vasut