On Thu, 2007-12-13 at 10:34 -0600, Kumar Gala wrote:
On Dec 13, 2007, at 10:24 AM, Joakim Tjernlund wrote:
I get this when I try to boot my board: ## Booting image at 00200000 ... Image Name: oskernel02a:p1a:99 Created: 2007-12-13 9:59:43 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1238992 Bytes = 1.2 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Loading Device Tree to 007fe000, end 007ff6f9 ... OK WARNING: could not create /bd_t FDT_ERR_NOSPACE. fdt_bd_t: FDT_ERR_NOSPACE ERROR: /bd_t node create failed - must RESET the board to recover. Resetting the board.
I have tried different combinations of -S and -R options to dtc, but nothing helps: dtc -S 2000 -R 2000 -f of-tmcu.dts -O asm > of-tmcu.S
If I remove the chosen node from my dts file, I get the error when libfdt tries to create a chosen node.
I am using dtc 1.0.0 and u-boot 1.3.1
How big is the .dtb if you don't specify -S? The -R should only be something like 8.
dtc -R 8 -f of-tmcu.dts -O asm > of-tmcu.S makes ls -s of-tmcu.S 24 of-tmcu.S and size of-tmcu.o text data bss dec hex filename 5696 0 0 5696 1640 of-tmcu.o
Jocke