Align flexspi node properties with linux device-tree properties Tested on LX2160A-RDB
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com --- Depends on https://patchwork.ozlabs.org/patch/1190054/ https://patchwork.ozlabs.org/patch/1190052/ https://patchwork.ozlabs.org/patch/1190051/
arch/arm/dts/fsl-lx2160a-rdb.dts | 24 +++++++++++++++++++++++- arch/arm/dts/fsl-lx2160a.dtsi | 15 +++++++++++++++ 2 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts index 46a9239c25..e542c6992a 100644 --- a/arch/arm/dts/fsl-lx2160a-rdb.dts +++ b/arch/arm/dts/fsl-lx2160a-rdb.dts @@ -16,7 +16,9 @@ / { model = "NXP Layerscape LX2160ARDB Board"; compatible = "fsl,lx2160ardb", "fsl,lx2160a"; - + aliases { + spi0 = &fspi; + }; };
&esdhc0 { @@ -28,6 +30,26 @@ mmc-hs200-1_8v; };
+&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + + mt35xu512aba1: flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <1>; + }; +}; + &i2c0 { status = "okay"; u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index a189333e40..8c2ab1da31 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -6,6 +6,8 @@ * */
+#include <dt-bindings/interrupt-controller/arm-gic.h> + / { compatible = "fsl,lx2160a"; interrupt-parent = <&gic>; @@ -49,6 +51,19 @@ <1 10 0x8>; /* Hypervisor PPI, active-low */ };
+ fspi: flexspi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c0: i2c@2000000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>;