Re: [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry

On Sun, Feb 11, 2018 at 6:18 PM, Jagan Teki jagannadh.teki@gmail.com wrote:

Add simple and meaningful kconfig option for prcm.c instead of using MACH type on Makefile.

PRCM (Power/Reset/Clock Management) is considered as a Multi-Functional Device, so used the same on Kconfig definition.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com

arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1fededd..2b9f48b 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -6,6 +6,12 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology"

+config MFD_SUN6I_PRCM

•   bool "Allwinner A31 PRCM controller"
  

•   help
  

•     Support for the PRCM (Power/Reset/Clock Management) unit available
  

•     in A31 SoC.
  

Do these entries even need to be visible? It's not like it makes sense to toggle them independently. This applies to almost all the patches in this series.

ChenYu

config SUNXI_HIGH_SRAM bool default n @@ -87,6 +93,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI

•   select MFD_SUN6I_PRCM
    select SUNXI_GEN_SUN6I
    select SUPPORT_SPL
    select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
  

diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 2a3c379..3c1c660 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -16,7 +16,7 @@ obj-y += pinmux.o ifndef CONFIG_MACH_SUN9I obj-y += usb_phy.o endif -obj-$(CONFIG_MACH_SUN6I) += prcm.o +obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o obj-$(CONFIG_MACH_SUN8I) += prcm.o obj-$(CONFIG_MACH_SUN9I) += prcm.o obj-$(CONFIG_MACH_SUN6I) += p2wi.o -- 2.7.4

---

U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot