Move default value definitions to to Kconfig SYS_CCSRBAR_DEFAULT.
Signed-off-by: York Sun york.sun@nxp.com ---
arch/powerpc/cpu/mpc85xx/Kconfig | 50 +++++++++++++++++++++++++++++++ arch/powerpc/include/asm/config_mpc85xx.h | 41 ------------------------- doc/README.ramboot-ppc85xx | 4 +-- 3 files changed, 52 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 9a5cd85..1d2e027 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -471,6 +471,56 @@ config MAX_CPUS cores, count the reserved ports. This will allocate enough memory in spin table to properly handle all cores.
+config SYS_CCSRBAR_DEFAULT + hex "Default CCSRBAR address" + default 0xff700000 if ARCH_BSC9131 || \ + ARCH_BSC9132 || \ + ARCH_C29X || \ + ARCH_MPC8536 || \ + ARCH_MPC8540 || \ + ARCH_MPC8541 || \ + ARCH_MPC8544 || \ + ARCH_MPC8548 || \ + ARCH_MPC8555 || \ + ARCH_MPC8560 || \ + ARCH_MPC8568 || \ + ARCH_MPC8569 || \ + ARCH_MPC8572 || \ + ARCH_P1010 || \ + ARCH_P1011 || \ + ARCH_P1020 || \ + ARCH_P1021 || \ + ARCH_P1022 || \ + ARCH_P1024 || \ + ARCH_P1025 || \ + ARCH_P2020 + default 0xff600000 if ARCH_P1023 + default 0xfe000000 if ARCH_B4420 || \ + ARCH_B4860 || \ + ARCH_P2041 || \ + ARCH_P3041 || \ + ARCH_P4080 || \ + ARCH_P5020 || \ + ARCH_P5040 || \ + ARCH_T1013 || \ + ARCH_T1014 || \ + ARCH_T1020 || \ + ARCH_T1022 || \ + ARCH_T1023 || \ + ARCH_T1024 || \ + ARCH_T1040 || \ + ARCH_T1042 || \ + ARCH_T2080 || \ + ARCH_T2081 || \ + ARCH_T4160 || \ + ARCH_T4240 + default 0xe0000000 if ARCH_QEMU_E500 + help + Default value of CCSRBAR comes from power-on-reset. It + is fixed on each SoC. Some SoCs can have different value + if changed by pre-boot regime. The value here must match + the current value in SoC. If not sure, do not change. + source "board/freescale/b4860qds/Kconfig" source "board/freescale/bsc9131rdb/Kconfig" source "board/freescale/bsc9132qds/Kconfig" diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index c92bc1e..474fd1a 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -9,10 +9,6 @@
/* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
-#ifdef CONFIG_SYS_CCSRBAR_DEFAULT -#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file." -#endif - /* * This macro should be removed when we no longer care about backwards * compatibility with older operating systems. @@ -39,27 +35,23 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_A004508 #define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_ARCH_MPC8540) #define CONFIG_SYS_FSL_NUM_LAWS 8 #define CONFIG_SYS_FSL_DDRC_GEN1 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8541) #define CONFIG_SYS_FSL_NUM_LAWS 8 #define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8544) #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_ARCH_MPC8548) @@ -67,7 +59,6 @@ #define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 #define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 #define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 @@ -84,12 +75,10 @@ #define CONFIG_SYS_FSL_NUM_LAWS 8 #define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8560) #define CONFIG_SYS_FSL_NUM_LAWS 8 #define CONFIG_SYS_FSL_DDRC_GEN1 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_ARCH_MPC8568) #define CONFIG_SYS_FSL_NUM_LAWS 10 @@ -98,7 +87,6 @@ #define QE_MURAM_SIZE 0x10000UL #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -111,7 +99,6 @@ #define QE_MURAM_SIZE 0x20000UL #define MAX_QE_RISC 4 #define QE_NUM_OF_SNUM 46 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -124,7 +111,6 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_DDR_115 #define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 #define CONFIG_SYS_FSL_ERRATUM_A004508 @@ -140,7 +126,6 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 @@ -165,7 +150,6 @@ #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A004508 @@ -177,7 +161,6 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A004508 @@ -192,7 +175,6 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define QE_MURAM_SIZE 0x6000UL @@ -208,7 +190,6 @@ #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 @@ -227,7 +208,6 @@ #define CONFIG_SYS_BMAN_NUM_PORTALS 3 #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_ERRATUM_A004508 #define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 @@ -241,7 +221,6 @@ #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A004508 @@ -255,7 +234,6 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define QE_MURAM_SIZE 0x6000UL @@ -268,7 +246,6 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 @@ -295,7 +272,6 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY @@ -332,7 +308,6 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY @@ -374,7 +349,6 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie" -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 @@ -423,7 +397,6 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY @@ -460,7 +433,6 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY @@ -486,7 +458,6 @@ #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 #define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A005125 @@ -507,7 +478,6 @@ #define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 #define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK @@ -575,7 +545,6 @@ #define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 #define CONFIG_SYS_FSL_ERRATUM_A007798 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_PCI_VER_3_X
@@ -618,7 +587,6 @@ #define CONFIG_SYS_FSL_ERRATUM_A006384 #define CONFIG_SYS_FSL_ERRATUM_A007212 #define CONFIG_SYS_FSL_ERRATUM_A004477 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_SFP_VER_3_0
#ifdef CONFIG_ARCH_B4860 @@ -681,7 +649,6 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #define QE_MURAM_SIZE 0x6000UL @@ -725,7 +692,6 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #define QE_MURAM_SIZE 0x6000UL @@ -778,7 +744,6 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A007212 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_ISBC_VER 2 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -799,22 +764,16 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_6 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 3 #define CONFIG_SYS_FSL_SEC_IDX_OFFSET 0x20000
#elif defined(CONFIG_ARCH_QEMU_E500) -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xe0000000
#else #error Processor type not defined for this platform #endif
-#ifndef CONFIG_SYS_CCSRBAR_DEFAULT -#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform." -#endif - #ifdef CONFIG_E6500 #define CONFIG_SYS_FSL_THREADS_PER_CORE 2 #else diff --git a/doc/README.ramboot-ppc85xx b/doc/README.ramboot-ppc85xx index 5cc546a..c9fef53 100644 --- a/doc/README.ramboot-ppc85xx +++ b/doc/README.ramboot-ppc85xx @@ -90,8 +90,8 @@ In the 2nd case bootloader has already re-located CCSRBAR to 0xffe00000
This will finally use the CONFIG_SYS_RAMBOOT.
-3. File name-> arch/powerpc/include/asm/config_mpc85xx.h - In the section of the particular SOC, for example P1020, +3. Change CONFIG_SYS_CCSRBAR_DEFAULT in menuconfig accordingly. + In the section of the particular SOC, for example P1020, pseudo code
#if defined(CONFIG_GO) #define CONFIG_SYS_CCSRBAR_DEFAULT 0xffe00000