On Tuesday, September 01, 2015 at 05:09:09 PM, Dinh Nguyen wrote:
On 08/31/2015 05:23 PM, Marek Vasut wrote:
On Monday, August 31, 2015 at 09:57:05 PM, dinguyen@opensource.altera.com
wrote:
From: Dinh Nguyen dinguyen@opensource.altera.com
Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is a bit different because it has a KSZ9031 PHY, so for now, ethernet doesn't quite work yet, as a few patches are needed to support the PHY.
I thought we did support the KSZ9031 PHY. What's the problem ?
Yeah, I just realized that. That's the problem when I've been working with v2013.10 U-Boot! I'll have ethernet in V2.
Cool :-)
Signed-off-by: Dinh Nguyen dinguyen@opensource.altera.com
Hi Marek,
This patch is based on your u-boot-socfpga/wip/boards branch.
OK, that makes sense.
Thanks, Dinh
arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_cyclone5_de0_sockit.dts | 61 +++ arch/arm/mach-socfpga/Kconfig | 7 + board/terasic/de0/MAINTAINERS | 5 + board/terasic/de0/Makefile | 9 +
I think it might be clearer to rename it to de0-nano-soc, what do you think ? What's the difference between de0-nano-soc and atlas btw ?
I don't know. From the website, DE0-Nano-SoC Kit/Atlas-SoC Kit, so DE0_Nano_SoCKit is synonymous with Atlas Sockit?
See the other email I guess.
[...]
diff --git a/configs/socfpga_de0_defconfig b/configs/socfpga_de0_defconfig new file mode 100644 index 0000000..000f322 --- /dev/null +++ b/configs/socfpga_de0_defconfig @@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_TARGET_SOCFPGA_CYCLONE5=y +CONFIG_TARGET_SOCFPGA_TERASIC_DE0=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_sockit" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_OF_CONTROL=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_GPIO=y +CONFIG_DWAPB_GPIO=y +CONFIG_SPL_DM=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_DM_SEQ_ALIAS=y
I think you don't need the DM_SEQ_ALIAS, it's needed only for QSPI to enforce the SPI NOR ordering.
Right, I missed this one.
:)
<snip>
+/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Terasic"
+/* Extra Environment */ +#define CONFIG_HOSTNAME socfpga_cyclone5
socfpga_d0_nano_soc might be better ;-)
Yeah..missed this one too.
Thanks!