This patch adds variables describing platform (soc, board, vendor) to default environment and Samsung's common misc initialisation to provide additional board information in envs.
This patch modifies envs to enable dual kernel boot - with separated DTB if the DTB file is loaded successfully; - with DTB apppended to uImage if DTB file is not found; This is neccesssary for backward compatibilty.
Signed-off-by: Piotr Wilczek p.wilczek@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com Cc: Lukasz Majewski l.majewski@samsung.com --- include/configs/trats.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/include/configs/trats.h b/include/configs/trats.h index 0877142..71b1a4e 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -148,9 +148,16 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ - "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ + "run loaduimage;" \ + "if run loaddtb; then " \ + "bootm 0x40007FC0 - ${fdtaddr};" \ + "fi;" \ + "bootm 0x40007FC0;\0" \ "updatemmc=" \ "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ "mmc boot 0 1 1 0\0" \ @@ -173,7 +180,7 @@ "mmcboot=" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ - "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \ + "run loaddtb; run bootk\0" \ "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ @@ -212,7 +219,6 @@ "setenv spl_imgaddr;" \ "setenv spl_addr_tmp;\0" \ "fdtaddr=40800000\0" \ - "fdtfile=exynos4210-trats.dtb\0"
/* Miscellaneous configurable options */ @@ -254,6 +260,8 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION
+#define CONFIG_MISC_INIT_R + /* EXT4 */ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE