Changes for supporting SPL
Signed-off-by: Aneesh V aneesh@ti.com --- arch/arm/cpu/armv7/start.S | 36 +++++++++++++++++++++++++----------- 1 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 8215d26..f5f08d9 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -42,7 +42,16 @@ _start: b reset ldr pc, _not_used ldr pc, _irq ldr pc, _fiq - +#ifdef CONFIG_PRELOADER +_undefined_instruction: .word _undefined_instruction +_software_interrupt: .word _software_interrupt +_prefetch_abort: .word _prefetch_abort +_data_abort: .word _data_abort +_not_used: .word _not_used +_irq: .word _irq +_fiq: .word _fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#else _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt _prefetch_abort: .word prefetch_abort @@ -51,6 +60,8 @@ _not_used: .word not_used _irq: .word irq _fiq: .word fiq _pad: .word 0x12345678 /* now 16*4=64 */ +#endif /* CONFIG_PRELOADER */ + .global _end_vect _end_vect:
@@ -171,10 +182,9 @@ stack_setup: mov sp, r4
adr r0, _start -#ifndef CONFIG_PRELOADER cmp r0, r6 + moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ beq clear_bss /* skip relocation */ -#endif mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -224,6 +234,15 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop + b clear_bss +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start + +#endif /* #ifndef CONFIG_PRELOADER */
clear_bss: ldr r0, _bss_start_ofs @@ -237,7 +256,6 @@ clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 bne clbss_l -#endif /* #ifndef CONFIG_PRELOADER */
/* * We are done. Do not return, instead branch to second part of board @@ -257,13 +275,6 @@ jump_2_ram: _board_init_r_ofs: .word board_init_r - _start
-_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - /************************************************************************* * * CPU_init_critical registers @@ -300,6 +311,8 @@ cpu_init_crit: bl lowlevel_init @ go setup pll,mux,memory mov lr, ip @ restore link mov pc, lr @ back to my caller + +#ifndef CONFIG_PRELOADER /* ************************************************************************* * @@ -488,3 +501,4 @@ fiq: bl do_fiq
#endif +#endif /* CONFIG_PRELOADER */