Re: [U-Boot-Users] Reset command causes Bus Fault on MPC823

In message B3EAAA8B12E2D611A7D800C0F03BC7D191BA1D@inconbdc.franklin.fele you wrote:

Been working on getting u-boot's reset command to work correctly on my RPXlite. Kept on getting bus failures around line 181 of cpu/mpc8xx/cpu_init.c (version 1.1.1). I finally tried commenting out the following lines (figuring that I wasn't an 850 and wasn't rev A silicon) and am now able to perform a reset successfully at u-boot's command prompt.

All of this has absolutely nothing to do with resetting the board.

What exactly is your memory map, and did you #define CFG_RESET_ADDRESS, and if, which value did you use?

Best regards,

Wolfgang Denk