This is not used. Drop the driver and Kconfig option.
Signed-off-by: Simon Glass sjg@chromium.org ---
common/usb_hub.c | 18 ---- drivers/usb/host/Makefile | 1 - drivers/usb/host/ehci-faraday.c | 144 -------------------------------- drivers/usb/host/ehci-hcd.c | 5 -- include/usb/fusbh200.h | 59 ------------- 5 files changed, 227 deletions(-) delete mode 100644 drivers/usb/host/ehci-faraday.c delete mode 100644 include/usb/fusbh200.h
diff --git a/common/usb_hub.c b/common/usb_hub.c index f7fd12c0450..a36350f846c 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -506,24 +506,6 @@ static int usb_scan_port(struct usb_device_scan *usb_scan) if (portchange & USB_PORT_STAT_C_ENABLE) { debug("port %d enable change, status %x\n", i + 1, portstatus); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE); - /* - * The following hack causes a ghost device problem - * to Faraday EHCI - */ -#ifndef CONFIG_USB_EHCI_FARADAY - /* - * EM interference sometimes causes bad shielded USB - * devices to be shutdown by the hub, this hack enables - * them again. Works at least with mouse driver - */ - if (!(portstatus & USB_PORT_STAT_ENABLE) && - (portstatus & USB_PORT_STAT_CONNECTION) && - usb_device_has_child_on_port(dev, i)) { - debug("already running port %i disabled by hub (EMI?), re-enabling...\n", - i + 1); - usb_hub_port_connect_change(dev, i); - } -#endif }
if (portstatus & USB_PORT_STAT_SUSPEND) { diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1f59e910d3b..cce78846d98 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o -obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c deleted file mode 100644 index 85a35269601..00000000000 --- a/drivers/usb/host/ehci-faraday.c +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Faraday USB 2.0 EHCI Controller - * - * (C) Copyright 2010 Faraday Technology - * Dante Su dantesu@faraday-tech.com - */ - -#include <common.h> -#include <log.h> -#include <asm/io.h> -#include <usb.h> -#include <linux/delay.h> -#include <usb/fusbh200.h> -#include <usb/fotg210.h> - -#include "ehci.h" - -#ifndef CFG_USB_EHCI_BASE_LIST -#define CFG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE } -#endif - -union ehci_faraday_regs { - struct fusbh200_regs usb; - struct fotg210_regs otg; -}; - -static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs) -{ - return !readl(®s->usb.easstr); -} - -void faraday_ehci_set_usbmode(struct ehci_ctrl *ctrl) -{ - /* nothing needs to be done */ -} - -int faraday_ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg) -{ - int spd, ret = PORTSC_PSPD_HS; - union ehci_faraday_regs *regs; - - ret = (void __iomem *)((ulong)ctrl->hcor - 0x10); - if (ehci_is_fotg2xx(regs)) - spd = OTGCSR_SPD(readl(®s->otg.otgcsr)); - else - spd = BMCSR_SPD(readl(®s->usb.bmcsr)); - - switch (spd) { - case 0: /* full speed */ - ret = PORTSC_PSPD_FS; - break; - case 1: /* low speed */ - ret = PORTSC_PSPD_LS; - break; - case 2: /* high speed */ - ret = PORTSC_PSPD_HS; - break; - default: - printf("ehci-faraday: invalid device speed\n"); - break; - } - - return ret; -} - -uint32_t *faraday_ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port) -{ - /* Faraday EHCI has one and only one portsc register */ - if (port) { - /* Printing the message would cause a scan failure! */ - debug("The request port(%d) is not configured\n", port); - return NULL; - } - - /* Faraday EHCI PORTSC register offset is 0x20 from hcor */ - return (uint32_t *)((uint8_t *)ctrl->hcor + 0x20); -} - -static const struct ehci_ops faraday_ehci_ops = { - .set_usb_mode = faraday_ehci_set_usbmode, - .get_port_speed = faraday_ehci_get_port_speed, - .get_portsc_register = faraday_ehci_get_portsc_register, -}; - -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor) -{ - struct ehci_hccr *hccr; - struct ehci_hcor *hcor; - union ehci_faraday_regs *regs; - uint32_t base_list[] = CFG_USB_EHCI_BASE_LIST; - - if (index < 0 || index >= ARRAY_SIZE(base_list)) - return -1; - ehci_set_controller_priv(index, NULL, &faraday_ehci_ops); - regs = (void __iomem *)base_list[index]; - hccr = (struct ehci_hccr *)®s->usb.hccr; - hcor = (struct ehci_hcor *)®s->usb.hcor; - - if (ehci_is_fotg2xx(regs)) { - /* A-device bus reset */ - /* ... Power off A-device */ - setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); - /* ... Drop vbus and bus traffic */ - clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); - mdelay(1); - /* ... Power on A-device */ - clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); - /* ... Drive vbus and bus traffic */ - setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); - mdelay(1); - /* Disable OTG & DEV interrupts, triggered at level-high */ - writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr); - /* Clear all interrupt status */ - writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr); - } else { - /* Interrupt=level-high */ - setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH); - /* VBUS on */ - clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF); - /* Disable all interrupts */ - writel(0x00, ®s->usb.bmier); - writel(0x1f, ®s->usb.bmisr); - } - - *ret_hccr = hccr; - *ret_hcor = hcor; - - return 0; -} - -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) -{ - return 0; -} diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9139d61dd0c..9839aa17492 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -705,12 +705,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(qhtoken); } else { dev->act_len = 0; -#ifndef CONFIG_USB_EHCI_FARADAY debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), ehci_readl(&ctrl->hcor->or_portsc[0]), ehci_readl(&ctrl->hcor->or_portsc[1])); -#endif }
free(qtd); @@ -1189,9 +1187,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor); if (rc) return rc; -#endif -#ifdef CONFIG_USB_EHCI_FARADAY - tweaks |= EHCI_TWEAK_NO_INIT_CF; #endif rc = ehci_common_init(ctrl, tweaks); if (rc) diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h deleted file mode 100644 index 6ae1d848801..00000000000 --- a/include/usb/fusbh200.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Faraday USB 2.0 EHCI Controller - * - * (C) Copyright 2010 Faraday Technology - * Dante Su dantesu@faraday-tech.com - */ - -#ifndef _FUSBH200_H -#define _FUSBH200_H - -struct fusbh200_regs { - struct { - uint32_t data[4]; - } hccr; /* 0x00 - 0x0f: hccr */ - struct { - uint32_t data[9]; - } hcor; /* 0x10 - 0x33: hcor */ - uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */ - uint32_t rsvd[2]; - uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */ - uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */ - uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */ -}; - -/* EOF & Async. Schedule Sleep Timer Register */ -#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */ -#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */ -#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ -#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ -#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ - -/* Bus Monitor Control Status Register */ -#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */ -#define BMCSR_SPD_LOW (1 << 9) -#define BMCSR_SPD_FULL (0 << 9) -#define BMCSR_SPD_MASK (3 << 9) -#define BMCSR_SPD_SHIFT 9 -#define BMCSR_SPD(x) ((x >> 9) & 0x03) -#define BMCSR_VBUS (1 << 8) /* VBUS Valid */ -#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */ -#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */ -#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */ -#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */ -#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */ -#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/ -#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/ -#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/ -#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/ - -/* Bus Monitor Interrupt Status Register */ -/* Bus Monitor Interrupt Enable Register */ -#define BMISR_DMAERR (1 << 4) /* DMA error */ -#define BMISR_DMA (1 << 3) /* DMA complete */ -#define BMISR_DEVRM (1 << 2) /* device removed */ -#define BMISR_OVD (1 << 1) /* over-current detected */ -#define BMISR_VBUSERR (1 << 0) /* VBUS error */ - -#endif