Hi Tony,
On 03.09.22 11:44, Tony Dinh wrote:
Hi Stefan,
On Thu, Sep 1, 2022 at 11:25 PM Stefan Roese sr@denx.de wrote:
Add timer_get_boot_us() to support boards, that have CONFIG_BOOTSTAGE enabled, like pogo_v4.
Signed-off-by: Stefan Roese sr@denx.de
v2:
- Change timer_get_boot_us() to use the timer_early functions
- Remove #if CONFIG_IS_ENABLED(BOOTSTAGE)
Simon, I'm currently looking into this timer_get_boot_us() to using timer_early_get_count() etc consolidation.
Indeed, as you've mentioned above, I think timer_early_get_count() and timer_early_get_rate() do need to take into consideration what the input_clock_type is for Kirkwood boards with CONFIG_BOOTSTAGE such as the Pogo V4.
I'm seeing on the Pogo V4 test, the timer command reports time about 6 times slower than it should. It does seem to jive with the fact that the Pogo V4 CONFIG_SYS_TCLK is 166Mhz, versus MVEBU 25MHz clock rate.
Ah, I've missing updating the early functions to also differentiate between fixed clocks and TCLK timer.
Please give the attached patch a try - should be applied on top of this latest patchset.
Thanks, Stefan