Re: [U-Boot] [PATCH] powerpc/fman/memac: use default MDIO_HOLD value

On 04/22/2014 05:21 AM, shh.xie@gmail.com wrote:

From: Shaohui Xie Shaohui.Xie@freescale.com

Current driver uses a Maximum value for MDIO_HOLD when doing 10G MDIO access, this is due to an errata A-006260 on T4 rev1.0 which is fixed on rev2.0, so remove the maximum value to use the default value for rev2.0.

Signed-off-by: Shaohui Xie Shaohui.Xie@freescale.com

Applied to u-boot-mpc85xx/master.

Thanks,

York