[U-Boot] [PATCH v3 1/8] nds32: add support of general functions in arch lib

Add Makefile, board.c, interrupts.c and bootm.c functions to nds32 architecture.

Signed-off-by: Macpaul Lin macpaul@andestech.com --- arch/nds32/lib/Makefile | 52 +++++ arch/nds32/lib/board.c | 452 +++++++++++++++++++++++++++++++++++++++++++ arch/nds32/lib/bootm.c | 240 +++++++++++++++++++++++ arch/nds32/lib/interrupts.c | 126 ++++++++++++ 4 files changed, 870 insertions(+), 0 deletions(-) create mode 100644 arch/nds32/lib/Makefile create mode 100644 arch/nds32/lib/board.c create mode 100644 arch/nds32/lib/bootm.c create mode 100644 arch/nds32/lib/interrupts.c

diff --git a/arch/nds32/lib/Makefile b/arch/nds32/lib/Makefile new file mode 100644 index 0000000..22748ce --- /dev/null +++ b/arch/nds32/lib/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2010 Andes Technology Corporation +# Shawn Lin, Andes Technology Corporation nobuhiro@andestech.com +# Macpaul Lin, Andes Technology Corporation macpaul@andestech.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(ARCH).a + +OBJS := board.o bootm.o interrupts.o + +all: $(LIB) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c new file mode 100644 index 0000000..b19e0f3 --- /dev/null +++ b/arch/nds32/lib/board.c @@ -0,0 +1,452 @@ +/* + * (C) Copyright 2002-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2010 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation nobuhiro@andestech.com + * Macpaul Lin, Andes Technology Corporation macpaul@andestech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * To match the U-Boot user interface on ARM platforms to the U-Boot + * standard (as on PPC platforms), some messages with debug character + * are removed from the default U-Boot build. + * + * Define DEBUG here if you want additional info as shown below + * printed upon startup: + * + * U-Boot code: 00F00000 -> 00F3C774 BSS: -> 00FC3274 + * IRQ Stack: 00ebff7c + * FIQ Stack: 00ebef7c + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <stdio_dev.h> +#include <timestamp.h> +#include <version.h> +#include <net.h> +#include <serial.h> +#include <nand.h> +#include <onenand_uboot.h> +#include <mmc.h> + +#ifdef CONFIG_BITBANGMII +#include <miiphy.h> +#endif + +#ifdef CONFIG_DRIVER_SMC91111 +#include "../drivers/net/smc91111.h" +#endif +#ifdef CONFIG_DRIVER_LAN91C96 +#include "../drivers/net/lan91c96.h" +#endif + +DECLARE_GLOBAL_DATA_PTR; + +ulong monitor_flash_len; + +#ifdef CONFIG_HAS_DATAFLASH +extern int AT91F_DataflashInit(void); +extern void dataflash_print_info(void); +#endif + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +const char version_string[] = + U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING; + +#ifdef CONFIG_DRIVER_RTL8019 +extern void rtl8019_get_enetaddr (uchar * addr); +#endif + +#if defined(CONFIG_HARD_I2C) || \ + defined(CONFIG_SOFT_I2C) +#include <i2c.h> +#endif + +/************************************************************************ + * Coloured LED functionality + ************************************************************************ + * May be supplied by boards if desired + */ +void inline __coloured_LED_init (void) {} +void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init"))); +void inline __red_LED_on (void) {} +void red_LED_on (void) __attribute__((weak, alias("__red_LED_on"))); +void inline __red_LED_off(void) {} +void red_LED_off(void) __attribute__((weak, alias("__red_LED_off"))); +void inline __green_LED_on(void) {} +void green_LED_on(void) __attribute__((weak, alias("__green_LED_on"))); +void inline __green_LED_off(void) {} +void green_LED_off(void) __attribute__((weak, alias("__green_LED_off"))); +void inline __yellow_LED_on(void) {} +void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on"))); +void inline __yellow_LED_off(void) {} +void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off"))); +void inline __blue_LED_on(void) {} +void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on"))); +void inline __blue_LED_off(void) {} +void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off"))); + +/************************************************************************ + * Init Utilities * + ************************************************************************ + * Some of this code should be moved into the core functions, + * or dropped completely, + * but let's get it working (again) first... + */ + +#if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE) +#define CONFIG_BAUDRATE 115200 +#endif +static int init_baudrate (void) +{ + char tmp[64]; /* long enough for environment variables */ + int i = getenv_f("baudrate", tmp, sizeof (tmp)); + gd->bd->bi_baudrate = gd->baudrate = (i > 0) + ? (int) simple_strtoul (tmp, NULL, 10) + : CONFIG_BAUDRATE; + + return (0); +} + +static int display_banner (void) +{ + printf ("\n\n%s\n\n", version_string); +#ifdef CONFIG_MODEM_SUPPORT + debug ("Modem Support enabled\n"); +#endif +#ifdef CONFIG_USE_INTERRUPT + debug ("IRQ Stack: %08lx\n", IRQ_STACK_START); + debug ("FIQ Stack: %08lx\n", FIQ_STACK_START); +#endif + + return (0); +} + +/* + * WARNING: this code looks "cleaner" than the PowerPC version, but + * has the disadvantage that you either get nothing, or everything. + * On PowerPC, you might see "DRAM: " before the system hangs - which + * gives a simple yet clear indication which part of the + * initialization if failing. + */ +static int display_dram_config (void) +{ + int i; + +#ifdef DEBUG + puts ("RAM Configuration:\n"); + + for(i=0; i<CONFIG_NR_DRAM_BANKS; i++) { + printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start); + print_size (gd->bd->bi_dram[i].size, "\n"); + } +#else + ulong size = 0; + + for (i=0; i<CONFIG_NR_DRAM_BANKS; i++) { + size += gd->bd->bi_dram[i].size; + } + puts("DRAM: "); + print_size(size, "\n"); +#endif + + return (0); +} + +#ifndef CONFIG_SYS_NO_FLASH +static void display_flash_config (ulong size) +{ + puts ("Flash: "); + print_size (size, "\n"); +} +#endif /* CONFIG_SYS_NO_FLASH */ + +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +static int init_func_i2c (void) +{ + puts ("I2C: "); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + puts ("ready\n"); + return (0); +} +#endif + +#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) +#include <pci.h> +static int arm_pci_init(void) +{ + pci_init(); + return 0; +} +#endif /* CONFIG_CMD_PCI || CONFIG_PCI */ + +/* + * Breathe some life into the board... + * + * Initialize a serial port as console, and carry out some hardware + * tests. + * + * The first part of initialization is running from Flash memory; + * its main purpose is to initialize the RAM so that we + * can relocate the monitor code to RAM. + */ + +/* + * All attempts to come up with a "common" initialization sequence + * that works for all boards and architectures failed: some of the + * requirements are just _too_ different. To get rid of the resulting + * mess of board dependent #ifdef'ed code we now make the whole + * initialization sequence configurable to the user. + * + * The requirements for any new initalization function is simple: it + * receives a pointer to the "global data" structure as it's only + * argument, and returns an integer return code, where 0 means + * "continue" and != 0 means "fatal error, hang the system". + */ +typedef int (init_fnc_t) (void); + +int print_cpuinfo (void); + +init_fnc_t *init_sequence[] = { +#if defined(CONFIG_ARCH_CPU_INIT) + arch_cpu_init, /* basic arch cpu dependent setup */ +#endif + board_init, /* basic board dependent setup */ +#if defined(CONFIG_USE_IRQ) + interrupt_init, /* set up exceptions */ +#endif + timer_init, /* initialize timer */ +#ifdef CONFIG_FSL_ESDHC + get_clocks, +#endif + env_init, /* initialize environment */ + init_baudrate, /* initialze baudrate settings */ + serial_init, /* serial communications setup */ + console_init_f, /* stage 1 init of console */ + display_banner, /* say that we are here */ +#if defined(CONFIG_DISPLAY_CPUINFO) + print_cpuinfo, /* display cpu info (and speed) */ +#endif +#if defined(CONFIG_DISPLAY_BOARDINFO) + checkboard, /* display board info */ +#endif +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + init_func_i2c, +#endif + dram_init, /* configure available RAM banks */ +#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) + arm_pci_init, +#endif + display_dram_config, + NULL, +}; + +void start_andesboot (void) +{ + init_fnc_t **init_fnc_ptr; + char *s; +#if defined(CONFIG_VFD) || defined(CONFIG_LCD) + unsigned long addr; +#endif + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t*)(_andesboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t)); + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + memset ((void*)gd, 0, sizeof (gd_t)); + gd->bd = (bd_t*)((char*)gd - sizeof(bd_t)); + memset (gd->bd, 0, sizeof (bd_t)); + + gd->flags |= GD_FLG_RELOC; + + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { + if ((*init_fnc_ptr)() != 0) { + hang (); + } + } + + /* andesboot_start is defined in the board-specific linker script */ + mem_malloc_init (_andesboot_start - CONFIG_SYS_MALLOC_LEN, + CONFIG_SYS_MALLOC_LEN); + +#ifndef CONFIG_SYS_NO_FLASH + /* configure available FLASH banks */ + gd->bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; + gd->bd->bi_flashsize = flash_init(); + gd->bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + gd->bd->bi_flashsize; + + if (gd->bd->bi_flashsize) + display_flash_config(gd->bd->bi_flashsize); +#endif /* CONFIG_SYS_NO_FLASH */ + +#ifdef CONFIG_VFD +# ifndef PAGE_SIZE +# define PAGE_SIZE 4096 +# endif + /* + * reserve memory for VFD display (always full pages) + */ + /* bss_end is defined in the board-specific linker script */ + addr = (__bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + vfd_setmem (addr); + gd->fb_base = addr; +#endif /* CONFIG_VFD */ + +#ifdef CONFIG_LCD + /* board init may have inited fb_base */ + if (!gd->fb_base) { +# ifndef PAGE_SIZE +# define PAGE_SIZE 4096 +# endif + /* + * reserve memory for LCD display (always full pages) + */ + /* bss_end is defined in the board-specific linker script */ + addr = (__bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + lcd_setmem (addr); + gd->fb_base = addr; + } +#endif /* CONFIG_LCD */ + +#if defined(CONFIG_CMD_NAND) + puts ("NAND: "); + nand_init(); /* go init the NAND */ +#endif + +#if defined(CONFIG_CMD_ONENAND) + onenand_init(); +#endif + +#ifdef CONFIG_HAS_DATAFLASH + AT91F_DataflashInit(); + dataflash_print_info(); +#endif + + /* initialize environment */ + env_relocate (); + +#ifdef CONFIG_VFD + /* must do this after the framebuffer is allocated */ + drv_vfd_init(); +#endif /* CONFIG_VFD */ + +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif + + /* IP Address */ + gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); + + stdio_init (); /* get the devices list going. */ + + jumptable_init (); + +#if defined(CONFIG_API) + /* Initialize API */ + api_init (); +#endif + + console_init_r (); /* fully init console as a device */ + +#if defined(CONFIG_ARCH_MISC_INIT) + /* miscellaneous arch dependent initialisations */ + arch_misc_init (); +#endif +#if defined(CONFIG_MISC_INIT_R) + /* miscellaneous platform dependent initialisations */ + misc_init_r (); +#endif + + /* enable exceptions */ + enable_interrupts (); + + /* Perform network card initialisation if necessary */ +#ifdef CONFIG_DRIVER_TI_EMAC + /* XXX: this needs to be moved to board init */ +extern void davinci_eth_set_mac_addr (const u_int8_t *addr); + if (getenv ("ethaddr")) { + uchar enetaddr[6]; + eth_getenv_enetaddr("ethaddr", enetaddr); + davinci_eth_set_mac_addr(enetaddr); + } +#endif + +#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) + /* XXX: this needs to be moved to board init */ + if (getenv ("ethaddr")) { + uchar enetaddr[6]; + eth_getenv_enetaddr("ethaddr", enetaddr); + smc_set_mac_addr(enetaddr); + } +#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ + + /* Initialize from environment */ + if ((s = getenv ("loadaddr")) != NULL) { + load_addr = simple_strtoul (s, NULL, 16); + } +#if defined(CONFIG_CMD_NET) + if ((s = getenv ("bootfile")) != NULL) { + copy_filename (BootFile, s, sizeof (BootFile)); + } +#endif + +#ifdef BOARD_LATE_INIT + board_late_init (); +#endif + +#ifdef CONFIG_GENERIC_MMC + puts ("MMC: "); + mmc_initialize (gd->bd); +#endif + +#ifdef CONFIG_BITBANGMII + bb_miiphy_init(); +#endif +#if defined(CONFIG_CMD_NET) +#if defined(CONFIG_NET_MULTI) + puts ("Net: "); +#endif + eth_initialize(gd->bd); +#if defined(CONFIG_RESET_PHY_R) + debug ("Reset Ethernet PHY\n"); + reset_phy(); +#endif +#endif + /* main_loop() can return to retry autoboot, if so just run it again. */ + for (;;) { + main_loop (); + } + + /* NOTREACHED - no way out of command loop except booting */ +} + +void hang (void) +{ + puts ("### ERROR ### Please RESET the board ###\n"); + for (;;); +} diff --git a/arch/nds32/lib/bootm.c b/arch/nds32/lib/bootm.c new file mode 100644 index 0000000..707ae92 --- /dev/null +++ b/arch/nds32/lib/bootm.c @@ -0,0 +1,240 @@ +/* + * Copyright (C) 2010 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation nobuhiro@andestech.com + * Macpaul Lin, Andes Technology Corporation macpaul@andestech.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <command.h> +#include <image.h> +#include <u-boot/zlib.h> +#include <asm/byteorder.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined (CONFIG_SETUP_MEMORY_TAGS) || \ + defined (CONFIG_CMDLINE_TAG) || \ + defined (CONFIG_INITRD_TAG) || \ + defined (CONFIG_SERIAL_TAG) || \ + defined (CONFIG_REVISION_TAG) +static void setup_start_tag (bd_t *bd); + +# ifdef CONFIG_SETUP_MEMORY_TAGS +static void setup_memory_tags (bd_t *bd); +# endif +static void setup_commandline_tag (bd_t *bd, char *commandline); + +# ifdef CONFIG_INITRD_TAG +static void setup_initrd_tag (bd_t *bd, ulong initrd_start, + ulong initrd_end); +# endif +static void setup_end_tag (bd_t *bd); + +static struct tag *params; +#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + bd_t *bd = gd->bd; + char *s; + int machid = bd->bi_arch_number; + void (*theKernel)(int zero, int arch, uint params); + +#ifdef CONFIG_CMDLINE_TAG + char *commandline = getenv ("bootargs"); +#endif + + if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) + return 1; + + theKernel = (void (*)(int, int, uint))images->ep; + + s = getenv ("machid"); + if (s) { + machid = simple_strtoul (s, NULL, 16); + printf ("Using machid 0x%x from environment\n", machid); + } + + show_boot_progress (15); + + debug ("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) theKernel); + +#if defined (CONFIG_SETUP_MEMORY_TAGS) || \ + defined (CONFIG_CMDLINE_TAG) || \ + defined (CONFIG_INITRD_TAG) || \ + defined (CONFIG_SERIAL_TAG) || \ + defined (CONFIG_REVISION_TAG) + setup_start_tag (bd); +#ifdef CONFIG_SERIAL_TAG + setup_serial_tag (&params); +#endif +#ifdef CONFIG_REVISION_TAG + setup_revision_tag (&params); +#endif +#ifdef CONFIG_SETUP_MEMORY_TAGS + setup_memory_tags (bd); +#endif +#ifdef CONFIG_CMDLINE_TAG + setup_commandline_tag (bd, commandline); +#endif +#ifdef CONFIG_INITRD_TAG + if (images->rd_start && images->rd_end) + setup_initrd_tag (bd, images->rd_start, images->rd_end); +#endif + setup_end_tag (bd); +#endif + + /* we assume that the kernel is in place */ + printf ("\nStarting kernel ...\n\n"); + +#ifdef CONFIG_USB_DEVICE + { + extern void udc_disconnect (void); + udc_disconnect (); + } +#endif + + cleanup_before_linux (); + + theKernel (0, machid, bd->bi_boot_params); + /* does not return */ + + return 1; +} + + +#if defined (CONFIG_SETUP_MEMORY_TAGS) || \ + defined (CONFIG_CMDLINE_TAG) || \ + defined (CONFIG_INITRD_TAG) || \ + defined (CONFIG_SERIAL_TAG) || \ + defined (CONFIG_REVISION_TAG) +static void setup_start_tag (bd_t *bd) +{ + params = (struct tag *) bd->bi_boot_params; + + params->hdr.tag = ATAG_CORE; + params->hdr.size = tag_size (tag_core); + + params->u.core.flags = 0; + params->u.core.pagesize = 0; + params->u.core.rootdev = 0; + + params = tag_next (params); +} + + +#ifdef CONFIG_SETUP_MEMORY_TAGS +static void setup_memory_tags (bd_t *bd) +{ + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + params->hdr.tag = ATAG_MEM; + params->hdr.size = tag_size (tag_mem32); + + params->u.mem.start = bd->bi_dram[i].start; + params->u.mem.size = bd->bi_dram[i].size; + + params = tag_next (params); + } +} +#endif /* CONFIG_SETUP_MEMORY_TAGS */ + + +static void setup_commandline_tag (bd_t *bd, char *commandline) +{ + char *p; + + if (!commandline) + return; + + /* eat leading white space */ + for (p = commandline; *p == ' '; p++); + + /* skip non-existent command lines so the kernel will still + * use its default command line. + */ + if (*p == '\0') + return; + + params->hdr.tag = ATAG_CMDLINE; + params->hdr.size = + (sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2; + + strcpy (params->u.cmdline.cmdline, p); + + params = tag_next (params); +} + + +#ifdef CONFIG_INITRD_TAG +static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end) +{ + /* an ATAG_INITRD node tells the kernel where the compressed + * ramdisk can be found. ATAG_RDIMG is a better name, actually. + */ + params->hdr.tag = ATAG_INITRD2; + params->hdr.size = tag_size (tag_initrd); + + params->u.initrd.start = initrd_start; + params->u.initrd.size = initrd_end - initrd_start; + + params = tag_next (params); +} +#endif /* CONFIG_INITRD_TAG */ + +#ifdef CONFIG_SERIAL_TAG +void setup_serial_tag (struct tag **tmp) +{ + struct tag *params = *tmp; + struct tag_serialnr serialnr; + void get_board_serial(struct tag_serialnr *serialnr); + + get_board_serial(&serialnr); + params->hdr.tag = ATAG_SERIAL; + params->hdr.size = tag_size (tag_serialnr); + params->u.serialnr.low = serialnr.low; + params->u.serialnr.high= serialnr.high; + params = tag_next (params); + *tmp = params; +} +#endif + +#ifdef CONFIG_REVISION_TAG +void setup_revision_tag(struct tag **in_params) +{ + u32 rev = 0; + u32 get_board_rev(void); + + rev = get_board_rev(); + params->hdr.tag = ATAG_REVISION; + params->hdr.size = tag_size (tag_revision); + params->u.revision.rev = rev; + params = tag_next (params); +} +#endif /* CONFIG_REVISION_TAG */ + + +static void setup_end_tag (bd_t *bd) +{ + params->hdr.tag = ATAG_NONE; + params->hdr.size = 0; +} + +#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ diff --git a/arch/nds32/lib/interrupts.c b/arch/nds32/lib/interrupts.c new file mode 100644 index 0000000..91cd270 --- /dev/null +++ b/arch/nds32/lib/interrupts.c @@ -0,0 +1,126 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke azu@sysgo.de + * + * Copyright (C) 2010 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation nobuhiro@andestech.com + * Macpaul Lin, Andes Technology Corporation macpaul@andestech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/ptregs.h> +#undef INTERRUPT_MODE + +extern void reset_cpu(ulong addr); + +int GIE_status(void) +{ + int ret; + + __asm__ __volatile__ ( + "mfsr $p0, $psw \n\t" + "andi %0, %0, 0x1 \n\t" + : "=r" (ret) + : + : "memory" + ); + return ret; +} + +#ifdef CONFIG_USE_INTERRUPT + +/* enable interrupts */ +void enable_interrupts (void) +{ + __asm__ __volatile__("setgie.e"); +} + +/* + * disable interrupts + * Return TRUE if GIE is enabled before we disable it. + */ +int disable_interrupts (void) +{ + int GIE_OriStatus; + + GIE_OriStatus = GIE_status(); + + __asm__ __volatile__("setgie.d"); + + return GIE_OriStatus; +} +#endif + +void bad_mode(void) +{ + panic("Resetting CPU ...\n"); + reset_cpu(0); +} + +void show_regs(struct pt_regs *regs) +{ + const char *processor_modes[]= + { "USER", "SuperUser" , "HyperVisor" }; + + printf("\n"); + printf("pc : [<%08lx>] sp: [<%08lx>]\n" + "ra : %08lx gp : %08lx fp : %08lx\n", + regs->PC, regs->SP, regs->RA, regs->GP, regs->FP); + printf("D1H: %081x D1L: %08lx D0H: %081x D0L: %08lx\n", + regs->D1HI, regs->D1LO, regs->D0HI, regs->D0LO); + printf("r27: %081x r26: %08lx r25: %08lx r24: %08lx\n", + regs->R27, regs->R26, regs->R25, regs->R24); + printf("r23: %081x r22: %08lx r21: %08lx r20: %08lx\n", + regs->R23, regs->R22, regs->R21, regs->R20); + printf("r19: %081x r18: %08lx r17: %08lx r16: %08lx\n", + regs->R19, regs->R18, regs->R17, regs->R16); + printf("r15: %081x r14: %08lx r13: %08lx r12: %08lx\n", + regs->R15, regs->R14, regs->R13, regs->R12); + printf("r11: %081x r10: %08lx r9 : %08lx r8 : %08lx\n", + regs->R11, regs->R10, regs->R9, regs->R8); + printf("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", + regs->R7, regs->R6, regs->R5, regs->R4); + printf("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", + regs->R3, regs->R2, regs->R1, regs->R0); + printf(" Interrupts %s Mode %s\n", + interrupts_enabled(regs) ? "on" : "off", + processor_modes[processor_mode(regs)]); +} + +void do_interruption(struct pt_regs *pt_regs, int EVIC_num) +{ + const char *interruption_type[]= { + "Reset", + "TLB Fill", + "TLB Not Present", + "TLB Misc", + "VLPT Miss", + "Cache Parity Error", + "Debug", + "General Exception", + "External Interrupt" + }; + + printf("%s\n", interruption_type[EVIC_num]); + show_regs(pt_regs); + bad_mode(); +}