Il 11 febbraio 2020 alle 5.11 Lokesh Vutla lokeshvutla@ti.com ha scritto:
On 11/02/20 1:49 AM, dariobin@libero.it wrote:
Hi Lokesh
Il 10 febbraio 2020 alle 5.22 Lokesh Vutla lokeshvutla@ti.com ha scritto:
On 10/02/20 12:17 AM, Dario Binacchi wrote:
Add the "u-boot,dm-pre-reloc" property to the "ti,tilcdc,panel" compatible node. In this way the video-uclass module can allocate the amount of memory needed to be assigned to the frame buffer.
hmm..why do you need to add pre-reloc for allocating the memory? pre-reloc flag is needed only when probing before relocation.
u-boot told me with an error message. Following the message I arrived at the video-uclass.c:
/* Device tree node may need the 'u-boot,dm-pre-reloc' or * 'u-boot,dm-pre-proper' tag */ printf("Video device '%s' cannot allocate frame buffer memory -ensure the device is set up before relocation\n", dev->name); return -ENOSPC;When does your driver gets probed?
The driver is probed in int board_late_init(void) { ret = uclass_get_device(UCLASS_VIDEO, 0, &dev); if (ret) printf("Unable to get VIDEO device (%d)\n", ret);
ret = uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con); if (ret) printf("Unable to get VIDEO CONSOLE device (%d)\n", ret);
snprintf(buf, sizeof(buf), "%s\n%s\n", U_BOOT_VERSION, corp); vidconsole_position_cursor(con, 0, 0); for (s = buf; *s; s++) vidconsole_put_char(con, *s);
}
but, without the "u-boot,dm-pre-reloc" property, the error occurs early, during the video device post_binding. I enabled debug messages in : - drivers/core/device.c - drivers/core/uclass.c - drivers/video/video-uclass.c and this is what is displayed by u-boot console: U-Boot SPL 2018.11-rc2 (Feb 11 2020 - 17:34:58 +0100) Trying to boot from NAND ## Checking hash(es) for Image uboot ... sha1+ OK ## Checking hash(es) for Image fdt ... sha1+ OK
U-Boot 2018.11-rc2 (Feb 11 2020 - 17:34:58 +0100)
CPU : AM335X-GP rev 2.1 Model: TI AM335x DRAM: Video frame buffers from 8fff0000 to 8fff0000 256 MiB uclass_find_device_by_seq: 0 -1 uclass_find_device_by_seq: 0 0 - -1 -1 'root_driver' - not found Bound device mod_exp_sw to root_driver Bound device scm@210000 to l4_wkup@44c00000 Bound device l4_wkup@44c00000 to ocp Bound device gpio@44e07000 to ocp Bound device gpio@4804c000 to ocp Bound device gpio@481ac000 to ocp Bound device gpio@481ae000 to ocp Bound device serial@44e09000 to ocp Bound device serial@48022000 to ocp Bound device serial@48024000 to ocp Bound device serial@481a6000 to ocp Bound device i2c@44e0b000 to ocp Bound device i2c@4802a000 to ocp Bound device mmc@48060000 to ocp Bound device timer@48040000 to ocp Bound device timer@48042000 to ocp Bound device timer@48044000 to ocp Bound device timer@48046000 to ocp Bound device timer@48048000 to ocp Bound device timer@4804a000 to ocp Bound device usb@47401000 to usb@47400000 Bound device usb@47401800 to usb@47400000 Bound device usb@47400000 to ocp Bound device ethernet@4a100000 to ocp Bound device ocp to root_driver Video device 'panel' cannot allocate frame buffer memory -ensure the device is set up before relocation Error binding driver 'am335x_fb': -28 Some drivers failed to bind initcall sequence 8ffca898 failed at call 8080f71f (err=-28) ### ERROR ### Please RESET the board ###
Thanks Best Regards Dario
Thanks and regards, Lokesh
Signed-off-by: Dario Binacchi dariobin@libero.it
$subject should be : arm: dts: am335x:
Ok. I will change it.
arch/arm/dts/am335x-brppt1-mmc.dts | 2 ++ arch/arm/dts/am335x-brppt1-nand.dts | 2 ++ arch/arm/dts/am335x-brppt1-spi.dts | 2 ++ arch/arm/dts/am335x-brsmarc1.dts | 1 + arch/arm/dts/am335x-brxre1.dts | 2 ++ arch/arm/dts/am335x-evm.dts | 1 + arch/arm/dts/am335x-evmsk.dts | 1 + arch/arm/dts/am335x-guardian.dts | 1 + arch/arm/dts/am335x-pdu001.dts | 1 + arch/arm/dts/am335x-pxm50.dts | 1 + arch/arm/dts/am335x-rut.dts | 1 + arch/arm/dts/da850-evm.dts | 1 + 12 files changed, 16 insertions(+)
diff --git a/arch/arm/dts/am335x-brppt1-mmc.dts b/arch/arm/dts/am335x-brppt1-mmc.dts index 9be34d9da0..6f919711f0 100644 --- a/arch/arm/dts/am335x-brppt1-mmc.dts +++ b/arch/arm/dts/am335x-brppt1-mmc.dts @@ -53,6 +53,8 @@ bkl-pwm = <&pwmbacklight>; bkl-tps = <&tps_bl>;
u-boot,dm-pre-reloc;This is u-boot specific dt flag. Please use it under *-u-boot.dtsi file.
Ok. I will fix it.
Dario
Thanks and regards, Lokesh