Hello Fabio,
Am 01.02.21 um 18:40 schrieb Fabio Estevam:
On Mon, Feb 1, 2021 at 1:36 PM Marek Vasut marex@denx.de wrote:
I don't think WB uses OF_SEPARATE with fitImages, so maybe there its not applicable at all ?
Wandboard does use OF_SEPARATE and FIT.
I have just tested flashing u-boot-with-spl.imx into a SD card and booting a wandboard.
It does behave the same as mx6sabresd:
- Fails to boot without your patch
- Boots fine with your patch
So, yes, wandboard can be used to test u-boot-with-spl.imx and avoid future regressions in Heiko's boot farm.
Last build from this morning:
http://xeidos.ddns.net/ubtestresults/result/777
You find log here:
http://xeidos.ddns.net/ubtestresults/result/files/results/777/tbot.log
I use currently SPL and u-boot.img ... seems I have to switch to above image ... currently I have a lot of load on my desk, so may this takes some time ... sorry
bye, Heiko
[1] extract part "update SPL and u-boot.img on wandboard" from logfile: │ │ ├─[wandboard-uboot] run load_spl │ │ │ ## ethernet@2188000 Waiting for PHY auto negotiation to complete.... done │ │ │ ## Using ethernet@2188000 device │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## Filename 'wandboard/tbot/SPL'. │ │ │ ## Load address: 0x12000000 │ │ │ ## Loading: *#### │ │ │ ## │ │ │ ## 1.6 MiB/s │ │ │ ## │ │ │ ## done │ │ │ ## Bytes transferred = 48128 (bc00 hex) │ │ │ ## │ │ ├─[wandboard-uboot] run upd_spl │ │ │ ## switch to partitions #0, OK │ │ │ ## mmc0 is current device │ │ │ ## │ │ │ ## MMC write: dev # 0, block # 2, count 95 ... 95 blocks written: OK │ │ ├─[wandboard-uboot] run cmp_spl │ │ │ ## Using ethernet@2188000 device │ │ │ ## │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## Filename 'wandboard/tbot/SPL'. │ │ │ ## │ │ │ ## Load address: 0x12000000 │ │ │ ## Loading: *#### │ │ │ ## 2.9 MiB/s │ │ │ ## │ │ │ ## done │ │ │ ## Bytes transferred = 48128 (bc00 hex) │ │ │ ## │ │ │ ## │ │ │ ## │ │ │ ## MMC read: dev # 0, block # 2, count 95 ... 95 blocks read: OK │ │ │ ## │ │ │ ## Total of 48128 byte(s) were the same │ │ │ ## │ │ ├─[wandboard-uboot] run load_ub │ │ │ ## Using ethernet@2188000 device │ │ │ ## │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## Filename 'wandboard/tbot/u-boot.img'. │ │ │ ## │ │ │ ## Load address: 0x12000000 │ │ │ ## Loading: *######################################## │ │ │ ## │ │ │ ## 2.9 MiB/s │ │ │ ## done │ │ │ ## Bytes transferred = 577444 (8cfa4 hex) │ │ │ ## │ │ ├─[wandboard-uboot] run upd_ub │ │ │ ## switch to partitions #0, OK │ │ │ ## mmc0 is current device │ │ │ ## │ │ │ ## MMC write: dev # 0, block # 138, count 1128 ... 1128 blocks written: OK │ │ │ ## │ │ ├─[wandboard-uboot] run cmp_ub │ │ │ ## Using ethernet@2188000 device │ │ │ ## │ │ │ ## TFTP from server 192.168.3.1; our IP address is 192.168.3.21 │ │ │ ## │ │ │ ## Filename 'wandboard/tbot/u-boot.img'. │ │ │ ## Load address: 0x12000000 │ │ │ ## │ │ │ ## Loading: *######################################## │ │ │ ## 2.5 MiB/s │ │ │ ## done │ │ │ ## Bytes transferred = 577444 (8cfa4 hex) │ │ │ ## │ │ │ ## MMC read: dev # 0, block # 138, count 1128 ... 1128 blocks read: OK │ │ │ ## Total of 577444 byte(s) were the same