-----Original Message----- From: Valentin Longchamp [mailto:valentin.longchamp@keymile.com] Sent: 27 March 2012 19:02 To: Prafulla Wadaskar Cc: u-boot@lists.denx.de Subject: Re: [PATCH v2 00/19] updates for keymile arm boards
Prafulla,
On 03/26/2012 01:34 PM, Valentin Longchamp wrote:
This patch series updates keymile boards with Kirkwood CPU and adds two new boards. This new boards are kmnusa and kmcoge5un. Also the existing boards with own config files were migrated to the common header km_kirkwood.h. Some small adaption in generic kirkwood code was needed due to two new features on the new board. First one is that the u-boot environment is in the SPI NOR flash and the second
one
is the direct MAC/MAC connection from the mvgbe interface to an simple switch.
Changes for v2:
- removed the two patches "spi/kirkwood: add weak functions
board_spi_bus_claim/release" and "mvgbe: remove warning for unused methods" from the series as they are were independent from it. The series is however dependent of these two patches.
Holger Brunck (13): arm/km: add board type to boards.cfg arm/km: add piggy mac adress offset for mgcoge3un arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE arm/km: use ARRAY_SIZE macro arm/km: fix wrong comment in SDRAM config for mgcoge3un arm/km: change maintainer for mgcoge3un arm/km: remove CONFIG_RESET_PHY_R km/arm: remove spi toggle command arm/km: add kmnusa board support arm/km: add kmcoge5un board support arm/km: convert mgcoge3un target to km_kirkwood arm/km: remove portl2.h and use km_kirkwood instead arm/km: cleanup km_kirkwood boards
Valentin Longchamp (6): arm/km: enable mii cmd arm/km: use correct kw_gpio function for NAND/SPI switching arm/km: implement weak function board_spi_clam_bus/release arm/kirkwood: protect the ENV_SPI #defines arm/km: correct init of 88e6352 switch in the reset_phy function arm/km: enable BOCO2 FPGA download support
MAINTAINERS | 4 +- arch/arm/include/asm/arch-kirkwood/config.h | 12 +- board/keymile/common/common.h | 12 + board/keymile/km_arm/128M16-1.cfg | 290
++++++++++++++++++++++++++
board/keymile/km_arm/256M8-1.cfg | 292
+++++++++++++++++++++++++++
board/keymile/km_arm/Makefile | 8 + board/keymile/km_arm/fpga_config.c | 212
+++++++++++++++++++
board/keymile/km_arm/km_arm.c | 119 +++++++----- board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- board/keymile/km_arm/managed_switch.c | 166 +++++++++++++++ boards.cfg | 10 +- include/configs/km/km_arm.h | 60 ++++-- include/configs/km_kirkwood.h | 157 +++++++++++++-- include/configs/mgcoge3un.h | 86 -------- include/configs/portl2.h | 85 -------- 15 files changed, 1256 insertions(+), 259 deletions(-) create mode 100644 board/keymile/km_arm/128M16-1.cfg create mode 100644 board/keymile/km_arm/256M8-1.cfg create mode 100644 board/keymile/km_arm/fpga_config.c create mode 100644 board/keymile/km_arm/managed_switch.c delete mode 100644 include/configs/mgcoge3un.h delete mode 100644 include/configs/portl2.h
We would love to get a feedback from you about this series. The merge window for 2012.06 is soon over and we would like to see these in the marvell tree before your pull request for this merge window (I guess you have a pull request planned for the current merge window ?)
Since you have posted patched within/before merge window closure, those are eligible to go on master branch. So don't worry, I will review them.
Regards.. Prafulla . . .
Best Regards
-- Valentin Longchamp Embedded Software Engineer Hardware and Chip Integration ______________________________________ KEYMILE AG Schwarzenburgstr. 73 CH-3097 Liebefeld Phone +41 31 377 1318 Fax +41 31 377 1212 valentin.longchamp@keymile.com www.keymile.com ______________________________________ KEYMILE: A Specialist as a Partner