Re: [U-Boot] [U-Boot, V2, 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full

On Fri, Feb 15, 2019 at 05:39:21PM -0600, Adam Ford wrote:

In order to fully support SPL_OF_CONTROL, we need BSS to be a bit larger. This patch relocates BSS to SDRAM instead of SRAM which is similar to how ARMv7 boards (like OMAP2+) do it.

This means two new variables are required: CONFIG_SPL_BSS_START_ADDR set to DAVINCI_DDR_EMIF_DATA_BASE CONFIG_SPL_BSS_MAX_SIZE is set to 0x1080000 which is 1 byte before the location where U-Boot will load.

Signed-off-by: Adam Ford aford173@gmail.com

This breaks building of omapl138_lcdk, please fix, thanks!