Add a driver for the Apollo Lake pinctrl. This mostly makes use of the common Intel pinctrl support.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v6: None Changes in v5: None Changes in v4: - Allow pinctrl nodes to have subnodes (i.e. GPIO nodes) - Drop GPIO_NUM_PAD_CFG_REGS - Switch over to use pinctrl for pad init/config - Tidy up the header file a little - apollolake -> Apollo Lake
Changes in v3: - Add various minor tidy-ups - Fix mixed case in GPIO defines - Rework how pads configuration is defined in TPL and SPL - Use the IRQ uclass instead of ITSS
Changes in v2: None
arch/x86/include/asm/arch-apollolake/gpio.h | 490 ++++++++++++++++++++ drivers/pinctrl/intel/Kconfig | 8 + drivers/pinctrl/intel/Makefile | 1 + drivers/pinctrl/intel/pinctrl_apl.c | 192 ++++++++ 4 files changed, 691 insertions(+) create mode 100644 arch/x86/include/asm/arch-apollolake/gpio.h create mode 100644 drivers/pinctrl/intel/pinctrl_apl.c
diff --git a/arch/x86/include/asm/arch-apollolake/gpio.h b/arch/x86/include/asm/arch-apollolake/gpio.h new file mode 100644 index 0000000000..f33025d7c5 --- /dev/null +++ b/arch/x86/include/asm/arch-apollolake/gpio.h @@ -0,0 +1,490 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Definitions for the GPIO subsystem on Apollolake + * + * Copyright (C) 2015 - 2017 Intel Corp. + * (Written by Alexandru Gagniuc alexandrux.gagniuc@intel.com for Intel Corp.) + * + * Placed in a separate file since some of these definitions can be used from + * assembly code + * + * Taken from gpio_apl.h in coreboot + */ + +#ifndef _ASM_ARCH_GPIO_H_ +#define _ASM_ARCH_GPIO_H_ + +/* Port ids */ +#if IS_ENABLED(CONFIG_SOC_INTEL_GLK) +#define PID_GPIO_AUDIO 0xC9 +#define PID_GPIO_SCC 0xC8 +#else +#define PID_GPIO_SW 0xC0 +#define PID_GPIO_S 0xC2 +#define PID_GPIO_W 0xC7 +#endif +#define PID_GPIO_NW 0xC4 +#define PID_GPIO_N 0xC5 +#define PID_ITSS 0xD0 +#define PID_RTC 0xD1 + +/* + * Miscellaneous Configuration register(MISCCFG). These are community-specific + * registers and are meant to house miscellaneous configuration fields per + * community. There are 8 GPIO groups: GPP_0 -> GPP_8 (Group 3 is absent) + */ +#define GPIO_MISCCFG 0x10 /* Miscellaneous Configuration offset */ +#define GPIO_GPE_SW_31_0 0 /* SOUTHWEST GPIO# 0 ~ 31 belong to GROUP0 */ +#define GPIO_GPE_SW_63_32 1 /* SOUTHWEST GPIO# 32 ~ 42 belong to GROUP1 */ +#define GPIO_GPE_W_31_0 2 /* WEST GPIO# 0 ~ 25 belong to GROUP2 */ +#define GPIO_GPE_NW_31_0 4 /* NORTHWEST GPIO# 0 ~ 17 belong to GROUP4 */ +#define GPIO_GPE_NW_63_32 5 /* NORTHWEST GPIO# 32 ~ 63 belong to GROUP5 */ +#define GPIO_GPE_NW_95_64 6 /* NORTHWEST GPIO# 64 ~ 76 belong to GROUP6 */ +#define GPIO_GPE_N_31_0 7 /* NORTH GPIO# 0 ~ 31 belong to GROUP7 */ +#define GPIO_GPE_N_63_32 8 /* NORTH GPIO# 32 ~ 61 belong to GROUP8 */ + +#define GPIO_MAX_NUM_PER_GROUP 32 + +/* + * Host Software Pad Ownership Register. + * The pins in the community are divided into 3 groups: + * GPIO 0 ~ 31, GPIO 32 ~ 63, GPIO 64 ~ 95 + */ +#define HOSTSW_OWN_REG_0 0x80 + +#define PAD_CFG_BASE 0x500 + +#define GPI_INT_STS_0 0x100 +#define GPI_INT_EN_0 0x110 + +#define GPI_SMI_STS_0 0x140 +#define GPI_SMI_EN_0 0x150 + +#define NUM_N_PADS (PAD_N(SVID0_CLK) + 1) +#define NUM_NW_PADS (PAD_NW(GPIO_123) + 1) +#define NUM_W_PADS (PAD_W(SUSPWRDNACK) + 1) +#define NUM_SW_PADS (PAD_SW(LPC_FRAMEB) + 1) + +#define NUM_N_GPI_REGS \ + (ALIGN(NUM_N_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP) + +#define NUM_NW_GPI_REGS \ + (ALIGN(NUM_NW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP) + +#define NUM_W_GPI_REGS \ + (ALIGN(NUM_W_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP) + +#define NUM_SW_GPI_REGS \ + (ALIGN(NUM_SW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP) + +/* + * Total number of GPI status registers across all GPIO communities in the SOC + */ +#define NUM_GPI_STATUS_REGS (NUM_N_GPI_REGS + NUM_NW_GPI_REGS \ + + NUM_W_GPI_REGS + NUM_SW_GPI_REGS) + +/* North community pads */ +#define GPIO_0 0 +#define GPIO_1 1 +#define GPIO_2 2 +#define GPIO_3 3 +#define GPIO_4 4 +#define GPIO_5 5 +#define GPIO_6 6 +#define GPIO_7 7 +#define GPIO_8 8 +#define GPIO_9 9 +#define GPIO_10 10 +#define GPIO_11 11 +#define GPIO_12 12 +#define GPIO_13 13 +#define GPIO_14 14 +#define GPIO_15 15 +#define GPIO_16 16 +#define GPIO_17 17 +#define GPIO_18 18 +#define GPIO_19 19 +#define GPIO_20 20 +#define GPIO_21 21 +#define GPIO_22 22 +#define GPIO_23 23 +#define GPIO_24 24 +#define GPIO_25 25 +#define GPIO_26 26 +#define GPIO_27 27 +#define GPIO_28 28 +#define GPIO_29 29 +#define GPIO_30 30 +#define GPIO_31 31 +#define GPIO_32 32 +#define GPIO_33 33 +#define GPIO_34 34 +#define GPIO_35 35 +#define GPIO_36 36 +#define GPIO_37 37 +#define GPIO_38 38 +#define GPIO_39 39 +#define GPIO_40 40 +#define GPIO_41 41 +#define GPIO_42 42 +#define GPIO_43 43 +#define GPIO_44 44 +#define GPIO_45 45 +#define GPIO_46 46 +#define GPIO_47 47 +#define GPIO_48 48 +#define GPIO_49 49 +#define GPIO_62 50 +#define GPIO_63 51 +#define GPIO_64 52 +#define GPIO_65 53 +#define GPIO_66 54 +#define GPIO_67 55 +#define GPIO_68 56 +#define GPIO_69 57 +#define GPIO_70 58 +#define GPIO_71 59 +#define GPIO_72 60 +#define GPIO_73 61 +#define JTAG_TCK 62 +#define JTAG_TRST_B 63 +#define JTAG_TMS 64 +#define JTAG_TDI 65 +#define JTAG_CX_PMODE 66 +#define JTAG_CX_PREQ_B 67 +#define JTAGX 68 +#define JTAG_CX_PRDY_B 69 +#define JTAG_TDO 70 +#define CNV_BRI_DT 71 +#define CNV_BRI_RSP 72 +#define CNV_RGI_DT 73 +#define CNV_RGI_RSP 74 +#define SVID0_ALERT_B 75 +#define SVID0_DATA 76 +#define SVID0_CLK 77 + +/* Northwest community pads */ +#define GPIO_187 78 +#define GPIO_188 79 +#define GPIO_189 80 +#define GPIO_190 81 +#define GPIO_191 82 +#define GPIO_192 83 +#define GPIO_193 84 +#define GPIO_194 85 +#define GPIO_195 86 +#define GPIO_196 87 +#define GPIO_197 88 +#define GPIO_198 89 +#define GPIO_199 90 +#define GPIO_200 91 +#define GPIO_201 92 +#define GPIO_202 93 +#define GPIO_203 94 +#define GPIO_204 95 +#define PMC_SPI_FS0 96 +#define PMC_SPI_FS1 97 +#define PMC_SPI_FS2 98 +#define PMC_SPI_RXD 99 +#define PMC_SPI_TXD 100 +#define PMC_SPI_CLK 101 +#define PMIC_PWRGOOD 102 +#define PMIC_RESET_B 103 +#define GPIO_213 104 +#define GPIO_214 105 +#define GPIO_215 106 +#define PMIC_THERMTRIP_B 107 +#define PMIC_STDBY 108 +#define PROCHOT_B 109 +#define PMIC_I2C_SCL 110 +#define PMIC_I2C_SDA 111 +#define GPIO_74 112 +#define GPIO_75 113 +#define GPIO_76 114 +#define GPIO_77 115 +#define GPIO_78 116 +#define GPIO_79 117 +#define GPIO_80 118 +#define GPIO_81 119 +#define GPIO_82 120 +#define GPIO_83 121 +#define GPIO_84 122 +#define GPIO_85 123 +#define GPIO_86 124 +#define GPIO_87 125 +#define GPIO_88 126 +#define GPIO_89 127 +#define GPIO_90 128 +#define GPIO_91 129 +#define GPIO_92 130 +#define GPIO_97 131 +#define GPIO_98 132 +#define GPIO_99 133 +#define GPIO_100 134 +#define GPIO_101 135 +#define GPIO_102 136 +#define GPIO_103 137 +#define FST_SPI_CLK_FB 138 +#define GPIO_104 139 +#define GPIO_105 140 +#define GPIO_106 141 +#define GPIO_109 142 +#define GPIO_110 143 +#define GPIO_111 144 +#define GPIO_112 145 +#define GPIO_113 146 +#define GPIO_116 147 +#define GPIO_117 148 +#define GPIO_118 149 +#define GPIO_119 150 +#define GPIO_120 151 +#define GPIO_121 152 +#define GPIO_122 153 +#define GPIO_123 154 + +/* West community pads */ +#define GPIO_124 155 +#define GPIO_125 156 +#define GPIO_126 157 +#define GPIO_127 158 +#define GPIO_128 159 +#define GPIO_129 160 +#define GPIO_130 161 +#define GPIO_131 162 +#define GPIO_132 163 +#define GPIO_133 164 +#define GPIO_134 165 +#define GPIO_135 166 +#define GPIO_136 167 +#define GPIO_137 168 +#define GPIO_138 169 +#define GPIO_139 170 +#define GPIO_146 171 +#define GPIO_147 172 +#define GPIO_148 173 +#define GPIO_149 174 +#define GPIO_150 175 +#define GPIO_151 176 +#define GPIO_152 177 +#define GPIO_153 178 +#define GPIO_154 179 +#define GPIO_155 180 +#define GPIO_209 181 +#define GPIO_210 182 +#define GPIO_211 183 +#define GPIO_212 184 +#define OSC_CLK_OUT_0 185 +#define OSC_CLK_OUT_1 186 +#define OSC_CLK_OUT_2 187 +#define OSC_CLK_OUT_3 188 +#define OSC_CLK_OUT_4 189 +#define PMU_AC_PRESENT 190 +#define PMU_BATLOW_B 191 +#define PMU_PLTRST_B 192 +#define PMU_PWRBTN_B 193 +#define PMU_RESETBUTTON_B 194 +#define PMU_SLP_S0_B 195 +#define PMU_SLP_S3_B 196 +#define PMU_SLP_S4_B 197 +#define PMU_SUSCLK 198 +#define PMU_WAKE_B 199 +#define SUS_STAT_B 200 +#define SUSPWRDNACK 201 + +/* Southwest community pads */ +#define GPIO_205 202 +#define GPIO_206 203 +#define GPIO_207 204 +#define GPIO_208 205 +#define GPIO_156 206 +#define GPIO_157 207 +#define GPIO_158 208 +#define GPIO_159 209 +#define GPIO_160 210 +#define GPIO_161 211 +#define GPIO_162 212 +#define GPIO_163 213 +#define GPIO_164 214 +#define GPIO_165 215 +#define GPIO_166 216 +#define GPIO_167 217 +#define GPIO_168 218 +#define GPIO_169 219 +#define GPIO_170 220 +#define GPIO_171 221 +#define GPIO_172 222 +#define GPIO_179 223 +#define GPIO_173 224 +#define GPIO_174 225 +#define GPIO_175 226 +#define GPIO_176 227 +#define GPIO_177 228 +#define GPIO_178 229 +#define GPIO_186 230 +#define GPIO_182 231 +#define GPIO_183 232 +#define SMB_ALERTB 233 +#define SMB_CLK 234 +#define SMB_DATA 235 +#define LPC_ILB_SERIRQ 236 +#define LPC_CLKOUT0 237 +#define LPC_CLKOUT1 238 +#define LPC_AD0 239 +#define LPC_AD1 240 +#define LPC_AD2 241 +#define LPC_AD3 242 +#define LPC_CLKRUNB 243 +#define LPC_FRAMEB 244 + +/* PERST_0 not defined */ +#define GPIO_PRT0_UDEF 0xFF + +#define TOTAL_PADS 245 +#define N_OFFSET GPIO_0 +#define NW_OFFSET GPIO_187 +#define W_OFFSET GPIO_124 +#define SW_OFFSET GPIO_205 + +/* Macros for translating a global pad offset to a local offset */ +#define PAD_N(pad) (pad - N_OFFSET) +#define PAD_NW(pad) (pad - NW_OFFSET) +#define PAD_W(pad) (pad - W_OFFSET) +#define PAD_SW(pad) (pad - SW_OFFSET) + +/* Linux names of the GPIO devices */ +#define GPIO_COMM_N_NAME "INT3452:00" +#define GPIO_COMM_NW_NAME "INT3452:01" +#define GPIO_COMM_W_NAME "INT3452:02" +#define GPIO_COMM_SW_NAME "INT3452:03" + +/* Following is used in gpio asl */ +#define GPIO_COMM_NAME "INT3452" +#define GPIO_COMM_0_DESC \ + "General Purpose Input/Output (GPIO) Controller - North" +#define GPIO_COMM_1_DESC \ + "General Purpose Input/Output (GPIO) Controller - Northwest" +#define GPIO_COMM_2_DESC \ + "General Purpose Input/Output (GPIO) Controller - West" +#define GPIO_COMM_3_DESC \ + "General Purpose Input/Output (GPIO) Controller - Southwest" + +#define GPIO_COMM0_PID PID_GPIO_N +#define GPIO_COMM1_PID PID_GPIO_NW +#define GPIO_COMM2_PID PID_GPIO_W +#define GPIO_COMM3_PID PID_GPIO_SW + +/* + * IOxAPIC IRQs for the GPIOs, overlap is expected as we encourage to use + * shared IRQ instead of direct IRQ, in case of overlapping, we can easily + * program one of the overlap to shared IRQ to avoid the conflict. + */ + +/* NorthWest community pads */ +#define PMIC_I2C_SDA_IRQ 0x32 +#define GPIO_74_IRQ 0x33 +#define GPIO_75_IRQ 0x34 +#define GPIO_76_IRQ 0x35 +#define GPIO_77_IRQ 0x36 +#define GPIO_78_IRQ 0x37 +#define GPIO_79_IRQ 0x38 +#define GPIO_80_IRQ 0x39 +#define GPIO_81_IRQ 0x3A +#define GPIO_82_IRQ 0x3B +#define GPIO_83_IRQ 0x3C +#define GPIO_84_IRQ 0x3D +#define GPIO_85_IRQ 0x3E +#define GPIO_86_IRQ 0x3F +#define GPIO_87_IRQ 0x40 +#define GPIO_88_IRQ 0x41 +#define GPIO_89_IRQ 0x42 +#define GPIO_90_IRQ 0x43 +#define GPIO_91_IRQ 0x44 +#define GPIO_97_IRQ 0x49 +#define GPIO_98_IRQ 0x4A +#define GPIO_99_IRQ 0x4B +#define GPIO_100_IRQ 0x4C +#define GPIO_101_IRQ 0x4D +#define GPIO_102_IRQ 0x4E +#define GPIO_103_IRQ 0x4F +#define GPIO_104_IRQ 0x50 +#define GPIO_105_IRQ 0x51 +#define GPIO_106_IRQ 0x52 +#define GPIO_109_IRQ 0x54 +#define GPIO_110_IRQ 0x55 +#define GPIO_111_IRQ 0x56 +#define GPIO_112_IRQ 0x57 +#define GPIO_113_IRQ 0x58 +#define GPIO_116_IRQ 0x5B +#define GPIO_117_IRQ 0x5C +#define GPIO_118_IRQ 0x5D +#define GPIO_119_IRQ 0x5E +#define GPIO_120_IRQ 0x5F +#define GPIO_121_IRQ 0x60 +#define GPIO_122_IRQ 0x61 +#define GPIO_123_IRQ 0x62 + +/* North community pads */ +#define GPIO_0_IRQ 0x63 +#define GPIO_1_IRQ 0x64 +#define GPIO_2_IRQ 0x65 +#define GPIO_3_IRQ 0x66 +#define GPIO_4_IRQ 0x67 +#define GPIO_5_IRQ 0x68 +#define GPIO_6_IRQ 0x69 +#define GPIO_7_IRQ 0x6A +#define GPIO_8_IRQ 0x6B +#define GPIO_9_IRQ 0x6C +#define GPIO_10_IRQ 0x6D +#define GPIO_11_IRQ 0x6E +#define GPIO_12_IRQ 0x6F +#define GPIO_13_IRQ 0x70 +#define GPIO_14_IRQ 0x71 +#define GPIO_15_IRQ 0x72 +#define GPIO_16_IRQ 0x73 +#define GPIO_17_IRQ 0x74 +#define GPIO_18_IRQ 0x75 +#define GPIO_19_IRQ 0x76 +#define GPIO_20_IRQ 0x77 +#define GPIO_21_IRQ 0x32 +#define GPIO_22_IRQ 0x33 +#define GPIO_23_IRQ 0x34 +#define GPIO_24_IRQ 0x35 +#define GPIO_25_IRQ 0x36 +#define GPIO_26_IRQ 0x37 +#define GPIO_27_IRQ 0x38 +#define GPIO_28_IRQ num_reset_vals0x39 +#define GPIO_29_IRQ 0x3A +#define GPIO_30_IRQ 0x3B +#define GPIO_31_IRQ 0x3C +#define GPIO_32_IRQ 0x3D +#define GPIO_33_IRQ 0x3E +#define GPIO_34_IRQ 0x3F +#define GPIO_35_IRQ 0x40 +#define GPIO_36_IRQ 0x41 +#define GPIO_37_IRQ 0x42 +#define GPIO_38_IRQ 0x43 +#define GPIO_39_IRQ 0x44 +#define GPIO_40_IRQ 0x45 +#define GPIO_41_IRQ 0x46 +#define GPIO_42_IRQ 0x47 +#define GPIO_43_IRQ 0x48 +#define GPIO_44_IRQ 0x49 +#define GPIO_45_IRQ 0x4A +#define GPIO_46_IRQ 0x4B +#define GPIO_47_IRQ 0x4C +#define GPIO_48_IRQ 0x4D +#define GPIO_49_IRQ 0x4E +#define GPIO_62_IRQ 0x5B +#define GPIO_63_IRQ 0x5C +#define GPIO_64_IRQ 0x5D +#define GPIO_65_IRQ 0x5E +#define GPIO_66_IRQ 0x5F +#define GPIO_67_IRQ 0x60 +#define GPIO_68_IRQ 0x61 +#define GPIO_69_IRQ 0x62 +#define GPIO_70_IRQ 0x63 +#define GPIO_71_IRQ 0x64 +#define GPIO_72_IRQ 0x65 +#define GPIO_73_IRQ 0x66 + +#endif /* _ASM_ARCH_GPIO_H_ */ diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig index c01c6244d9..974be13d97 100644 --- a/drivers/pinctrl/intel/Kconfig +++ b/drivers/pinctrl/intel/Kconfig @@ -13,4 +13,12 @@ config INTEL_PINCTRL_PADCFG_PADTOL config INTEL_PINCTRL_IOSTANDBY def_bool y
+config PINCTRL_INTEL_APL + bool "Support Intel Apollo Lake (APL)" + help + Add support for Intel Apollo Lake pin-control and pin-mux settings. + These are mostly read from the device tree, with the early-pads + property in the host bridge and the pads property in the fsp-s + subnode of the host bridge. + endif diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile index bc1aad2c06..3aed8e9663 100644 --- a/drivers/pinctrl/intel/Makefile +++ b/drivers/pinctrl/intel/Makefile @@ -3,3 +3,4 @@ # Copyright 2019 Google LLC
obj-y += pinctrl.o +obj-$(CONFIG_PINCTRL_INTEL_APL) += pinctrl_apl.o diff --git a/drivers/pinctrl/intel/pinctrl_apl.c b/drivers/pinctrl/intel/pinctrl_apl.c new file mode 100644 index 0000000000..bd80435ffa --- /dev/null +++ b/drivers/pinctrl/intel/pinctrl_apl.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Intel Corp. + * Copyright 2019 Google LLC + * + * Taken partly from coreboot gpio.c + */ + +#define LOG_CATEGORY UCLASS_GPIO + +#include <common.h> +#include <dm.h> +#include <dt-structs.h> +#include <p2sb.h> +#include <asm/intel_pinctrl.h> +#include <asm-generic/gpio.h> +#include <asm/intel_pinctrl_defs.h> + +/** + * struct apl_gpio_platdata - platform data for each device + * + * @dtplat: of-platdata data from C struct + */ +struct apl_gpio_platdata { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + /* Put this first since driver model will copy the data here */ + struct dtd_intel_apl_pinctrl dtplat; +#endif +}; + +static const struct reset_mapping rst_map[] = { + { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, + { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, +}; + +/* Groups for each community */ +static const struct pad_group apl_community_n_groups[] = { + INTEL_GPP(N_OFFSET, N_OFFSET, GPIO_31), /* NORTH 0 */ + INTEL_GPP(N_OFFSET, GPIO_32, JTAG_TRST_B), /* NORTH 1 */ + INTEL_GPP(N_OFFSET, JTAG_TMS, SVID0_CLK), /* NORTH 2 */ +}; + +static const struct pad_group apl_community_w_groups[] = { + INTEL_GPP(W_OFFSET, W_OFFSET, OSC_CLK_OUT_1), /* WEST 0 */ + INTEL_GPP(W_OFFSET, OSC_CLK_OUT_2, SUSPWRDNACK),/* WEST 1 */ +}; + +static const struct pad_group apl_community_sw_groups[] = { + INTEL_GPP(SW_OFFSET, SW_OFFSET, SMB_ALERTB), /* SOUTHWEST 0 */ + INTEL_GPP(SW_OFFSET, SMB_CLK, LPC_FRAMEB), /* SOUTHWEST 1 */ +}; + +static const struct pad_group apl_community_nw_groups[] = { + INTEL_GPP(NW_OFFSET, NW_OFFSET, PROCHOT_B), /* NORTHWEST 0 */ + INTEL_GPP(NW_OFFSET, PMIC_I2C_SCL, GPIO_106), /* NORTHWEST 1 */ + INTEL_GPP(NW_OFFSET, GPIO_109, GPIO_123), /* NORTHWEST 2 */ +}; + +/* TODO(sjg@chromium.org): Consider moving this to device tree */ +static const struct pad_community apl_gpio_communities[] = { + { + .port = PID_GPIO_N, + .first_pad = N_OFFSET, + .last_pad = SVID0_CLK, + .num_gpi_regs = NUM_N_GPI_REGS, + .gpi_status_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS + + NUM_SW_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_N", + .acpi_path = "\_SB.GPO0", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = apl_community_n_groups, + .num_groups = ARRAY_SIZE(apl_community_n_groups), + }, { + .port = PID_GPIO_NW, + .first_pad = NW_OFFSET, + .last_pad = GPIO_123, + .num_gpi_regs = NUM_NW_GPI_REGS, + .gpi_status_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_NW", + .acpi_path = "\_SB.GPO1", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = apl_community_nw_groups, + .num_groups = ARRAY_SIZE(apl_community_nw_groups), + }, { + .port = PID_GPIO_W, + .first_pad = W_OFFSET, + .last_pad = SUSPWRDNACK, + .num_gpi_regs = NUM_W_GPI_REGS, + .gpi_status_offset = NUM_SW_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_W", + .acpi_path = "\_SB.GPO2", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = apl_community_w_groups, + .num_groups = ARRAY_SIZE(apl_community_w_groups), + }, { + .port = PID_GPIO_SW, + .first_pad = SW_OFFSET, + .last_pad = LPC_FRAMEB, + .num_gpi_regs = NUM_SW_GPI_REGS, + .gpi_status_offset = 0, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_int_sts_reg_0 = GPI_INT_STS_0, + .gpi_int_en_reg_0 = GPI_INT_EN_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_SW", + .acpi_path = "\_SB.GPO3", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + .groups = apl_community_sw_groups, + .num_groups = ARRAY_SIZE(apl_community_sw_groups), + }, +}; + +static int apl_pinctrl_ofdata_to_platdata(struct udevice *dev) +{ + struct p2sb_child_platdata *pplat; + const struct pad_community *comm = NULL; + int i; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct apl_gpio_platdata *plat = dev_get_platdata(dev); + int ret; + + /* + * It would be nice to do this in the bind() method, but with + * of-platdata binding happens in the order that DM finds things in the + * linker list (i.e. alphabetical order by driver name). So the GPIO + * device may well be bound before its parent (p2sb), and this call + * will fail if p2sb is not bound yet. + * + * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc + */ + ret = p2sb_set_port_id(dev, plat->dtplat.intel_p2sb_port_id); + if (ret) + return log_msg_ret("Could not set port id", ret); +#endif + /* Attach this device to its community structure */ + pplat = dev_get_parent_platdata(dev); + for (i = 0; i < ARRAY_SIZE(apl_gpio_communities); i++) { + if (apl_gpio_communities[i].port == pplat->pid) + comm = &apl_gpio_communities[i]; + } + + return intel_pinctrl_ofdata_to_platdata(dev, comm, 2); +} + +static const struct udevice_id apl_gpio_ids[] = { + { .compatible = "intel,apl-pinctrl"}, + { } +}; + +U_BOOT_DRIVER(apl_pinctrl_drv) = { + .name = "intel_apl_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = apl_gpio_ids, + .probe = intel_pinctrl_probe, + .ops = &intel_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .ofdata_to_platdata = apl_pinctrl_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct intel_pinctrl_priv), + .platdata_auto_alloc_size = sizeof(struct apl_gpio_platdata), +};