Hi Tim,
(quite unrelated to this series): after applying tons of patches, there are a list that are obsolete and need to be rebased. I applied several of the patches you sent, some have open issues, some cannot be applied (as this series), as they depend on other patches too.
I would appreciate if you can check what is missing for Gateworks, and then repost on top of u-boot-imx (or you wait my PR to Tom, I will send it today).
Thanks, Stefano
On 09.04.22 00:14, Tim Harvey wrote:
Gateworks produces many products from a single PCB with subloaded components. Add an additional two levels of dtb name matching so that for example a GW7400-A matches the dtb name of gw74xx.dtb
Signed-off-by: Tim Harvey tharvey@gateworks.com
board/gateworks/venice/eeprom.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/board/gateworks/venice/eeprom.c b/board/gateworks/venice/eeprom.c index 62b8125960c7..282d55f2ae30 100644 --- a/board/gateworks/venice/eeprom.c +++ b/board/gateworks/venice/eeprom.c @@ -259,8 +259,16 @@ const char *eeprom_get_dtb_name(int level, char *buf, int sz) break; case 2: /* don't care about PCB or BOM revision */ break;
case 3: /* don't care about last digit of model */buf[strlen(buf) - 1] = 'x';break;case 4: /* don't care about last two digits of model */buf[strlen(buf) - 1] = 'x';buf[strlen(buf) - 2] = 'x';break;break;