We are switching to a model where our board file can directly fail probing of serial devices when they're not usable, so remove the current runtime hack we have.
Signed-off-by: Alexander Graf agraf@suse.de --- arch/arm/mach-bcm283x/include/mach/gpio.h | 1 - board/raspberrypi/rpi/rpi.c | 43 ------------------------------- drivers/gpio/bcm2835_gpio.c | 2 +- 3 files changed, 1 insertion(+), 45 deletions(-)
diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h index 751594d09f..1bcb5846ca 100644 --- a/arch/arm/mach-bcm283x/include/mach/gpio.h +++ b/arch/arm/mach-bcm283x/include/mach/gpio.h @@ -61,7 +61,6 @@ struct bcm2835_gpio_platdata { unsigned long base; };
-int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio); void bcm2835_gpio_set_pinmux(struct udevice *dev, int handle);
#endif /* _BCM2835_GPIO_H_ */ diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 3b7a54f519..a96d5d8952 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -419,54 +419,11 @@ static void get_board_rev(void) printf("RPI %s (0x%x)\n", model->name, revision); }
-#ifndef CONFIG_PL01X_SERIAL -static bool rpi_is_serial_active(void) -{ - int serial_gpio = 15; - struct udevice *dev; - - /* - * The RPi3 disables the mini uart by default. The easiest way to find - * out whether it is available is to check if the RX pin is muxed. - */ - - if (uclass_first_device(UCLASS_GPIO, &dev) || !dev) - return true; - - if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5) - return false; - - return true; -} - -/* Disable mini-UART I/O if it's not pinmuxed to our pins. - * The firmware only enables it if explicitly done in config.txt: enable_uart=1 - */ -static void rpi_disable_inactive_uart(void) -{ - struct udevice *dev; - struct bcm283x_mu_serial_platdata *plat; - - if (uclass_get_device_by_driver(UCLASS_SERIAL, - DM_GET_DRIVER(serial_bcm283x_mu), - &dev) || !dev) - return; - - if (!rpi_is_serial_active()) { - plat = dev_get_platdata(dev); - plat->disabled = true; - } -} -#endif - int board_init(void) { #ifdef CONFIG_HW_WATCHDOG hw_watchdog_init(); #endif -#ifndef CONFIG_PL01X_SERIAL - rpi_disable_inactive_uart(); -#endif
get_board_rev();
diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c index 209cbed9e6..3edd90ea97 100644 --- a/drivers/gpio/bcm2835_gpio.c +++ b/drivers/gpio/bcm2835_gpio.c @@ -73,7 +73,7 @@ static int bcm2835_gpio_set_value(struct udevice *dev, unsigned gpio, return 0; }
-int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio) +static int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio) { struct bcm2835_gpios *gpios = dev_get_priv(dev); u32 val;