Re: [U-Boot] [U-Boot, v2] arm, am33xx: update for siemens am335x based boards

On Tue, Jun 16, 2015 at 02:59:34PM +0200, Heiko Schocher wrote:

updates for the siemens am335x based boards:

• draco: add delay for DDR3 configuration
• change MTD partition layout and add a possibility to redefine MTD layout in board header.
• move ubi support to common header file
• draco: improve dtb naming
• draco: set CONFIG_SYS_CBSIZE to 1024
• add generic env based led Leds can now be defined in Environment
• add generic env based dfu button Which gpio is used for the dfu button can be defined through the Environment
• set MACH_TYPE only if defined
• draco: increase CPU freq to 300MHz
• Add time command to siemens am33xx boards
• DDR3: increase default tRFC
• draco: enable pullup for DFU and ERST pin
• change print format DDR3

Signed-off-by: Samuel Egli samuel.egli@siemens.com Acked-by: Heiko Schocher hs@denx.de Reviewed-by: Tom Rini trini@konsulko.com

Signed-off-by: Heiko Schocher hs@denx.de

Applied to u-boot/master, thanks!