Fix the frequencies listed in PLL configuration comments to match the actual frequencies programmed into hardware. Furthermore, add a comment which explains how those frequencies are calculated, so it won't be necessary to look it up all over the datasheet and make more mistakes in the calculation in the future.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 17 ++++++++++++++++- arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 17 ++++++++++++++++- 2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 8a7156c93bf..b72a2f63f16 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -190,6 +190,21 @@ CLK_LPTIM45_LSE >;
+ /* + * cfg = < DIVM1 DIVN P Q R PQR(p,q,r) >; + * frac = < f >; + * + * PRQ(p,q,r) ... for p,q,r: 0-output disabled / 1-output enabled + * DIVN ... actually multiplier, but RCC_PLL1CFGR1 calls the field DIVN + * m ... for PLL1,2: m=2 ; for PLL3,4: m=1 + * XTAL = 24 MHz + * + * VCO = ( XTAL / (DIVM1 + 1) ) * m * ( DIVN + 1 + ( f / 8192 ) ) + * P = VCO / (P + 1) + * Q = VCO / (Q + 1) + * R = VCO / (R + 1) + */ + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { compatible = "st,stm32mp1-pll"; @@ -208,7 +223,7 @@ u-boot,dm-pre-reloc; };
- /* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */ + /* VCO = 600.0 MHz => P = 100, Q = 50, R = 50 */ pll4: st,pll@3 { compatible = "st,stm32mp1-pll"; reg = <3>; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index 19f4221f876..25a288b0475 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -144,6 +144,21 @@ CLK_LPTIM45_LSE >;
+ /* + * cfg = < DIVM1 DIVN P Q R PQR(p,q,r) >; + * frac = < f >; + * + * PRQ(p,q,r) ... for p,q,r: 0-output disabled / 1-output enabled + * DIVN ... actually multiplier, but RCC_PLL1CFGR1 calls the field DIVN + * m ... for PLL1,2: m=2 ; for PLL3,4: m=1 + * XTAL = 24 MHz + * + * VCO = ( XTAL / (DIVM1 + 1) ) * m * ( DIVN + 1 + ( f / 8192 ) ) + * P = VCO / (P + 1) + * Q = VCO / (Q + 1) + * R = VCO / (R + 1) + */ + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { compatible = "st,stm32mp1-pll"; @@ -162,7 +177,7 @@ u-boot,dm-pre-reloc; };
- /* VCO = 600.0 MHz => P = 99, Q = 74, R = 99 */ + /* VCO = 594.0 MHz => P = 99, Q = 74, R = 99 */ pll4: st,pll@3 { compatible = "st,stm32mp1-pll"; reg = <3>;