[U-Boot] [PATCH v2 0/2] Add support for only one CS in fsl Quad SPI

SOC’s like LS1012A has only one chip select signal out to connect with flash and the 64M flash is attached to it. On boards the same CS is connected to different flash via mux. So at one time only one flash is active and it is not possible to scan other flash at run time.

Suresh Gupta (2): spi: fsl_qspi: Add support for one chip select armv8: dts: fsl-ls1012a: Change number of CS in SPI node

arch/arm/dts/fsl-ls1012a.dtsi | 2 +- drivers/spi/fsl_qspi.c | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-)