Hi Tom,
I have been meaning to have a crack at setting up a little hardware lab for a while.
I made some progress recently and hooked up a rpi_3 with sdwire for USB/SD, ykush for power and a little computer to control it. It builds U-Boot, sticks it on the SD card and runs pytest.
I pushed a tree here and hopefully you can see the 'hwlab' thing at the end:
https://gitlab.denx.de/u-boot/custodians/u-boot-dm/pipelines/148
So far it is just running the 'help' test. It seems to hang with serial console problems if I try to do more. It is not 100% reliable yet. I based it on Stephen's test hooks:
https://github.com/sglass68/uboot-test-hooks
Is it possible to share this so that others can use the lab when they push trees? Is it as simple as adding to the .gitlab-ci.yml file as I have done here?
https://gitlab.denx.de/u-boot/custodians/u-boot-dm/blob/gitlab-working/.gitl...
I also got tbot going in a similar way, to test booting into Linux. Should we look at integrating that at the same time? It should be fairly easy to do.
I have quite a lot of random boards and in principle it should not be too hard to hook up some more of them, with sufficient SDwires, hubs and patience.
Regards, Simon