Fix: flash.c: In function 'flash_erase': flash.c:276:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk wd@denx.de --- total: 0 errors, 0 warnings, 49 lines checked NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE
board/cray/L1/flash.c | 25 +++++++++++-------------- 1 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/board/cray/L1/flash.c b/board/cray/L1/flash.c index a3d893e..77a2100 100644 --- a/board/cray/L1/flash.c +++ b/board/cray/L1/flash.c @@ -273,7 +273,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); volatile FLASH_WORD_SIZE *addr2; - int flag, prot, sect, l_sect; + int flag, prot, sect;
if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -303,16 +303,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); }
- l_sect = -1; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts();
/* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ - addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); - printf("Erasing sector %p\n", addr2); + addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); + printf("Erasing sector %p\n", addr2);
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; @@ -320,15 +318,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - l_sect = sect; - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7(info, sect); + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7(info, sect); } }