On Mon, Nov 25, 2019 at 12:11 PM Simon Glass sjg@chromium.org wrote:
The Primary-to-Sideband bus (P2SB) is used to access various peripherals through memory-mapped I/O in a large chunk of PCI space. The space is segmented into different channels and peripherals are accessed by device-specific means within those channels. Devices should be added in the device tree as subnodes of the p2sb.
This adds a uclass and enables it for sandbox.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v5:
- Add a way to obtain the port ID for a device
Changes in v4:
- Adjust condition for binding children
Changes in v3: None Changes in v2: None
configs/sandbox_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + drivers/misc/Kconfig | 33 ++++++ drivers/misc/Makefile | 1 + drivers/misc/p2sb-uclass.c | 216 ++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/p2sb.h | 135 +++++++++++++++++++++ 7 files changed, 388 insertions(+) create mode 100644 drivers/misc/p2sb-uclass.c create mode 100644 include/p2sb.h
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index a8144436eb..5a3c4f151d 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -151,6 +151,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_SANDBOX=y +CONFIG_P2SB=y CONFIG_PHY=y CONFIG_PHY_SANDBOX=y CONFIG_PINCTRL=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 02702fa7a5..478e4bd9d4 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -136,6 +136,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_SANDBOX=y +CONFIG_P2SB=y CONFIG_PHY=y CONFIG_PHY_SANDBOX=y CONFIG_PINCTRL=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 82bb093c56..71643af9c2 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -226,6 +226,39 @@ config NUVOTON_NCT6102D disable the legacy UART, the watchdog or other devices in the Nuvoton Super IO chips on X86 platforms.
+config P2SB
bool "Intel Primary-to-Sideband Bus"depends on X86 || SANDBOXhelpThis enables support for the Intel Primary-to-Sideband bus,abbreviated to P2SB. The P2SB is used to access various peripheralssuch as eSPI, GPIO, through memory-mapped I/O in a large chunk of PCIspace. The space is segmented into different channels and peripheralsare accessed by device-specific means within those channels. Devicesshould be added in the device tree as subnodes of the P2SB. APeripheral Channel Register? (PCR) API is provided to access thosedevices - see pcr_readl(), etc.+config SPL_P2SB
bool "Intel Primary-to-Sideband Bus in SPL"depends on SPL && (X86 || SANDBOX)helpThe Primary-to-Sideband bus is used to access various peripheralsthrough memory-mapped I/O in a large chunk of PCI space. The space issegmented into different channels and peripherals are accessed bydevice-specific means within those channels. Devices should be addedin the device tree as subnodes of the p2sb.+config TPL_P2SB
bool "Intel Primary-to-Sideband Bus in TPL"depends on TPL && (X86 || SANDBOX)helpThe Primary-to-Sideband bus is used to access various peripheralsthrough memory-mapped I/O in a large chunk of PCI space. The space issegmented into different channels and peripherals are accessed bydevice-specific means within those channels. Devices should be addedin the device tree as subnodes of the p2sb.config PWRSEQ bool "Enable power-sequencing drivers" depends on DM diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 55976d6be5..78b598b367 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o obj-$(CONFIG_NS87308) += ns87308.o obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o +obj-$(CONFIG_P2SB) += p2sb-uclass.o obj-$(CONFIG_PCA9551_LED) += pca9551_led.o obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o obj-$(CONFIG_QFW) += qfw.o diff --git a/drivers/misc/p2sb-uclass.c b/drivers/misc/p2sb-uclass.c new file mode 100644 index 0000000000..a198700b5f --- /dev/null +++ b/drivers/misc/p2sb-uclass.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Uclass for Primary-to-sideband bus, used to access various peripherals
- Copyright 2019 Google LLC
- Written by Simon Glass sjg@chromium.org
- */
+#include <common.h> +#include <dm.h> +#include <mapmem.h> +#include <p2sb.h> +#include <spl.h> +#include <asm/io.h> +#include <dm/uclass-internal.h>
+#define PCR_COMMON_IOSF_1_0 1
+static void *_pcr_reg_address(struct udevice *dev, uint offset) +{
struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);struct udevice *p2sb = dev_get_parent(dev);struct p2sb_uc_priv *upriv = dev_get_uclass_priv(p2sb);uintptr_t reg_addr;/* Create an address based off of port id and offset */reg_addr = upriv->mmio_base;reg_addr += pplat->pid << PCR_PORTID_SHIFT;reg_addr += offset;return map_sysmem(reg_addr, 4);+}
+/*
- The mapping of addresses via the SBREG_BAR assumes the IOSF-SB
- agents are using 32-bit aligned accesses for their configuration
- registers. For IOSF versions greater than 1_0, IOSF-SB
- agents can use any access (8/16/32 bit aligned) for their
- configuration registers
- */
+static inline void check_pcr_offset_align(uint offset, uint size) +{
const size_t align = PCR_COMMON_IOSF_1_0 ? sizeof(uint32_t) : size;assert(IS_ALIGNED(offset, align));+}
+uint pcr_read32(struct udevice *dev, uint offset) +{
void *ptr;uint val;/* Ensure the PCR offset is correctly aligned */assert(IS_ALIGNED(offset, sizeof(uint32_t)));ptr = _pcr_reg_address(dev, offset);val = readl(ptr);unmap_sysmem(ptr);return val;+}
+uint pcr_read16(struct udevice *dev, uint offset) +{
/* Ensure the PCR offset is correctly aligned */check_pcr_offset_align(offset, sizeof(uint16_t));return readw(_pcr_reg_address(dev, offset));+}
+uint pcr_read8(struct udevice *dev, uint offset) +{
/* Ensure the PCR offset is correctly aligned */check_pcr_offset_align(offset, sizeof(uint8_t));return readb(_pcr_reg_address(dev, offset));+}
+/*
- After every write one needs to perform a read an innocuous register to
- ensure the writes are completed for certain ports. This is done for
- all ports so that the callers don't need the per-port knowledge for
- each transaction.
- */
+static void write_completion(struct udevice *dev, uint offset) +{
readl(_pcr_reg_address(dev, ALIGN_DOWN(offset, sizeof(uint32_t))));+}
+void pcr_write32(struct udevice *dev, uint offset, uint indata) +{
/* Ensure the PCR offset is correctly aligned */assert(IS_ALIGNED(offset, sizeof(indata)));writel(indata, _pcr_reg_address(dev, offset));/* Ensure the writes complete */write_completion(dev, offset);+}
+void pcr_write16(struct udevice *dev, uint offset, uint indata) +{
/* Ensure the PCR offset is correctly aligned */check_pcr_offset_align(offset, sizeof(uint16_t));writew(indata, _pcr_reg_address(dev, offset));/* Ensure the writes complete */write_completion(dev, offset);+}
+void pcr_write8(struct udevice *dev, uint offset, uint indata) +{
/* Ensure the PCR offset is correctly aligned */check_pcr_offset_align(offset, sizeof(uint8_t));writeb(indata, _pcr_reg_address(dev, offset));/* Ensure the writes complete */write_completion(dev, offset);+}
+void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set) +{
uint data32;data32 = pcr_read32(dev, offset);data32 &= ~clr;data32 |= set;pcr_write32(dev, offset, data32);+}
+void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set) +{
uint data16;data16 = pcr_read16(dev, offset);data16 &= ~clr;data16 |= set;pcr_write16(dev, offset, data16);+}
+void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set) +{
uint data8;data8 = pcr_read8(dev, offset);data8 &= ~clr;data8 |= set;pcr_write8(dev, offset, data8);+}
+int p2sb_get_port_id(struct udevice *dev) +{
struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);return pplat->pid;+}
+int p2sb_set_port_id(struct udevice *dev, int portid) +{
struct udevice *ps2b;struct p2sb_child_platdata *pplat;if (!CONFIG_IS_ENABLED(OF_PLATDATA))return -ENOSYS;uclass_find_first_device(UCLASS_P2SB, &ps2b);if (!ps2b)return -EDEADLK;dev->parent = ps2b;/** We must allocate this, since when the device was bound it did not* have a parent.* TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc*/dev->parent_platdata = malloc(sizeof(*pplat));if (!dev->parent_platdata)return -ENOMEM;pplat = dev_get_parent_platdata(dev);pplat->pid = portid;return 0;+}
+static int p2sb_child_post_bind(struct udevice *dev) +{ +#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev);int ret;u32 pid;ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid);if (ret)return ret;pplat->pid = pid;+#endif
return 0;+}
+static int p2sb_post_bind(struct udevice *dev) +{
if (spl_phase() > PHASE_TPL && !CONFIG_IS_ENABLED(OF_PLATDATA))return dm_scan_fdt_dev(dev);return 0;+}
+UCLASS_DRIVER(p2sb) = {
.id = UCLASS_P2SB,.name = "p2sb",.per_device_auto_alloc_size = sizeof(struct p2sb_uc_priv),.post_bind = p2sb_post_bind,.child_post_bind = p2sb_child_post_bind,.per_child_platdata_auto_alloc_size =sizeof(struct p2sb_child_platdata),+}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 8431ad9c44..c1bab17ad1 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -70,6 +70,7 @@ enum uclass_id { UCLASS_NOP, /* No-op devices */ UCLASS_NORTHBRIDGE, /* Intel Northbridge / SDRAM controller */ UCLASS_NVME, /* NVM Express device */
UCLASS_P2SB, /* (x86) Primary-to-Sideband Bus */ UCLASS_PANEL, /* Display panel, such as an LCD */ UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */ UCLASS_PCH, /* x86 platform controller hub */diff --git a/include/p2sb.h b/include/p2sb.h new file mode 100644 index 0000000000..60c7f70773 --- /dev/null +++ b/include/p2sb.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright 2019 Google LLC
- Written by Simon Glass sjg@chromium.org
- */
+#ifndef __p2sb_h +#define __p2sb_h
+/* Port Id lives in bits 23:16 and register offset lives in 15:0 of address */ +#define PCR_PORTID_SHIFT 16
+/**
- struct p2sb_child_platdata - Information about each child of a p2sb device
- @pid: Port ID for this child
- */
+struct p2sb_child_platdata {
uint pid;+};
+/**
- struct p2sb_uc_priv - information for the uclass about each device
- This must be set up by the driver when it is probed
- @mmio_base: Base address of P2SB region
- */
+struct p2sb_uc_priv {
uint mmio_base;+};
+/**
- struct p2sb_ops - Operations for the P2SB (none at present)
- */
+struct p2sb_ops { +};
+#define p2sb_get_ops(dev) ((struct p2sb_ops *)(dev)->driver->ops)
+/**
- pcr_read32/16/8() - Read from a PCR device
- Reads data from a PCR device within the P2SB
- @dev: Device to read from
- @offset: Offset within device to read
- @return value read
- */
+uint pcr_read32(struct udevice *dev, uint offset); +uint pcr_read16(struct udevice *dev, uint offset); +uint pcr_read8(struct udevice *dev, uint offset);
+/**
- pcr_read32/16/8() - Write to a PCR device
- Writes data to a PCR device within the P2SB
- @dev: Device to write to
- @offset: Offset within device to write
- @data: Data to write
- */
+void pcr_write32(struct udevice *dev, uint offset, uint data); +void pcr_write16(struct udevice *dev, uint offset, uint data); +void pcr_write8(struct udevice *dev, uint offset, uint data);
+/**
- pcr_clrsetbits32/16/8() - Update a PCR device
- Updates dat in a PCR device within the P2SB
typo: data
- This reads from the device, clears and set bits, then writes back.
- new_data = (old_data & ~clr) | set
- @dev: Device to update
- @offset: Offset within device to update
- @clr: Bits to clear after reading
- @set: Bits to set before writing
- */
+void pcr_clrsetbits32(struct udevice *dev, uint offset, uint clr, uint set); +void pcr_clrsetbits16(struct udevice *dev, uint offset, uint clr, uint set); +void pcr_clrsetbits8(struct udevice *dev, uint offset, uint clr, uint set);
Reviewed-by: Bin Meng bmeng.cn@gmail.com