Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board.
Signed-off-by: Yanhong Wang yanhong.wang@starfivetech.com --- configs/starfive_visionfive2_defconfig | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index dbd42e78d0..47559070c2 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -11,6 +11,7 @@ CONFIG_SPL_TEXT_BASE=0x8000000 CONFIG_SYS_PROMPT="StarFive #" CONFIG_DM_RESET=y CONFIG_SPL_MMC=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK=0x8180000 CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -21,6 +22,7 @@ CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000 CONFIG_ARCH_RV64I=y CONFIG_CMODEL_MEDANY=y CONFIG_RISCV_SMODE=y +# CONFIG_OF_BOARD_FIXUP is not set CONFIG_FIT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_QSPI_BOOT=y @@ -32,6 +34,8 @@ CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_ID_EEPROM=y +CONFIG_SYS_EEPROM_BUS_NUM=5 CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x0 CONFIG_SPL_BSS_START_ADDR=0x8040000 @@ -43,21 +47,34 @@ CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80000000 CONFIG_SYS_SPL_MALLOC_SIZE=0x400000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2 +CONFIG_SPL_I2C=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_EEPROM=y +CONFIG_SYS_EEPROM_SIZE=512 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_TFTPPUT=y +CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_JH7110=y -# CONFIG_I2C is not set +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SPL_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0X50 CONFIG_MMC_HS400_SUPPORT=y CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_MMC_DW=y