On Wed, May 03, 2017 at 11:36:06AM +0530, Jagan Teki wrote:
On Thu, Apr 13, 2017 at 11:39 AM, Peng Fan peng.fan@nxp.com wrote:
Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards.
Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Jagan Teki jagan@openedev.com Cc: Stefano Babic sbabic@denx.de
V2: None
drivers/spi/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f3f7dbe..bef864f 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -197,6 +197,12 @@ config OMAP3_SPI
endif # if DM_SPI
+config SOFT_SPI
bool "Soft SPI driver"Did you move this for dm-driven file? since we've two files with same config
This config is for dm and non-dm both.
helpEnable Soft SPI driver. This driver is to use GPIO simulatethe SPI protocol.If possible please write few lines about this
I understand this two line help message will trigger check patch warning, but I think this is clear to tell user what this option is.
Thanks, Peng.
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot