When DT define aliases for etherner0 and ethernet1, U-Boot automatically patched MAC addresses using ethaddr and eth1addr environment variables respectively.
Custom initialization is no longer needed.
Signed-off-by: Sergei Ianovich ynvich@gmail.com CC: Marek Vasut marex@denx.de --- Changes v1..v2 * use alias instead of manual updating as suggested by Marek Vasut
board/icpdas/lp8x4x/lp8x4x.c | 17 ----------------- 1 file changed, 17 deletions(-)
diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c index 0888960..a7a2e21 100644 --- a/board/icpdas/lp8x4x/lp8x4x.c +++ b/board/icpdas/lp8x4x/lp8x4x.c @@ -114,25 +114,8 @@ int usb_board_stop(void) #endif
#ifdef CONFIG_DRIVER_DM9000 -void lp8x4x_eth1_mac_init(void) -{ - u8 eth1addr[8]; - int i; - u8 reg; - - eth_getenv_enetaddr_by_index("eth", 1, eth1addr); - if (!is_valid_ether_addr(eth1addr)) - return; - - for (i = 0, reg = 0x10; i < 6; i++, reg++) { - writeb(reg, (u8 *)(DM9000_IO_2)); - writeb(eth1addr[i], (u8 *)(DM9000_DATA_2)); - } -} - int board_eth_init(bd_t *bis) { - lp8x4x_eth1_mac_init(); return dm9000_initialize(bis); } #endif