Re: [U-Boot] [U-Boot, 02/27] power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 value

On Sat, Feb 27, 2016 at 07:18:50PM +0100, Paul Kocialkowski wrote:

This enables the VAUX1 supply, used for eMMC power in standard configurations. Its voltage is determined by the value of the BOOT2 pin of the TWL6030.

Note that the TWL6030 might already have enabled this regulator at startup (depending on the value of the BOOT3 pin of the TWL6030), according to the TWL6030 datasheet.

Signed-off-by: Paul Kocialkowski contact@paulk.fr

Applied to u-boot/master, thanks!