Hi,
On 10/30/24 19:39, Quentin Schulz wrote:
Hi Naoki,
On 10/30/24 4:09 AM, FUKAUMI Naoki wrote:
Hi,
could you review this patch, anyone?
Best regards,
-- FUKAUMI Naoki Radxa Computer (Shenzhen) Co., Ltd.
On 8/25/24 07:33, FUKAUMI Naoki wrote:
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI NOR flash) share pins (i.e. eMMC and SPI NOR flash are exclusive), new defconfig and dts specifically for SPI NOR flash is required.
Signed-off-by: FUKAUMI Naoki naoki@radxa.com
Changes in v2
- fix subject
arch/arm/dts/rk3588s-rock-5a-spi-u-boot.dtsi | 24 ++++++ arch/arm/dts/rk3588s-rock-5a-spi.dts | 4 + board/radxa/rock5a-rk3588s/MAINTAINERS | 5 +- configs/rock5a-spi-rk3588s_defconfig | 83 ++++++++++++++++++++ 4 files changed, 113 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/rk3588s-rock-5a-spi-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-rock-5a-spi.dts create mode 100644 configs/rock5a-spi-rk3588s_defconfig
diff --git a/arch/arm/dts/rk3588s-rock-5a-spi-u-boot.dtsi b/arch/arm/ dts/rk3588s-rock-5a-spi-u-boot.dtsi new file mode 100644 index 00000000000..5cd131d3cb1 --- /dev/null +++ b/arch/arm/dts/rk3588s-rock-5a-spi-u-boot.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright (c) 2023 Collabora Ltd.
- */
+#include "rk3588s-u-boot.dtsi"
+&fspim0_pins { + bootph-pre-ram; + bootph-some-ram; +};
+&sdhci { + status = "disabled"; +};
+&sfc { + status = "okay";
+ flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; +};
I assume the board can only be fitted with an SPI NOR or an eMMC and not both at the same time? If that's the case, then the status = disabled and status = okay should be in the dts. I assume we want this to be in the Linux kernel first too, either as a separate DTS or with a DTSO (not sure what they will want).
maybe it's time to update this patch.
https://patchwork.kernel.org/project/linux-rockchip/patch/20230913064505.773...
rock-5a-base.dtsi (common part) rock-5a.dts (same as current one) rock-5a-spi-dts
diff --git a/arch/arm/dts/rk3588s-rock-5a-spi.dts b/arch/arm/dts/ rk3588s-rock-5a-spi.dts new file mode 100644 index 00000000000..780e90d041b --- /dev/null +++ b/arch/arm/dts/rk3588s-rock-5a-spi.dts @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/; +#include "rk3588s-rock-5a.dts" diff --git a/board/radxa/rock5a-rk3588s/MAINTAINERS b/board/radxa/ rock5a-rk3588s/MAINTAINERS index a569efa74e3..06ebc9829f4 100644 --- a/board/radxa/rock5a-rk3588s/MAINTAINERS +++ b/board/radxa/rock5a-rk3588s/MAINTAINERS @@ -4,6 +4,5 @@ R: Jonas Karlman jonas@kwiboo.se S: Maintained F: board/radxa/rock5a-rk3588s F: include/configs/rock5a-rk3588s.h -F: configs/rock5a-rk3588s_defconfig -F: arch/arm/dts/rk3588s-rock-5a.dts -F: arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi +F: configs/rock5a* +F: arch/arm/dts/rk3588s-rock-5a* diff --git a/configs/rock5a-spi-rk3588s_defconfig b/configs/rock5a- spi-rk3588s_defconfig new file mode 100644 index 00000000000..297278c7a06 --- /dev/null +++ b/configs/rock5a-spi-rk3588s_defconfig
If Radxa starts having many such options, maybe it won't make a lot of sense to duplicate configs but rather have config fragments to change the default DT and add a few symbols that differ from the base (I assume we may have something similar needed for rock 5b+ compared to rock5b for example?
I'm thinking doing same for ROCK 5C...
https://github.com/RadxaNaoki/u-boot/commits/rock-5c/
Keeping all configs in sync for essentially same board with small differences may be difficult, maybe using config fragments will help?
any "config fragments" doc/example?
Best regards,
-- FUKAUMI Naoki Radxa Computer (Shenzhen) Co., Ltd.
@@ -0,0 +1,83 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rk3588s-rock-5a-spi" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_ROCK5A_RK3588=y +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-rock-5a.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +# CONFIG_OF_UPSTREAM is not set +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned- clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y
I assume out of the MMC_DW_ROCKCHIP and MMC_SDHCI_ROCKCHIP drivers, one isn't needed anymore as it's the one for the eMMC and the other for the SD card?
Cheers, Quentin