From: Lokesh Vutla lokeshvutla@ti.com
Its not compulsory that speed definition should be same on EFUSE_BOOTROM register for all keystone 2 devices. So, allow for board specific speed definitions.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: Nishanth Menon nm@ti.com --- arch/arm/mach-keystone/clock.c | 12 ++++++------ arch/arm/mach-keystone/include/mach/clock.h | 4 ++-- board/ti/ks2_evm/board_k2e.c | 2 +- board/ti/ks2_evm/board_k2hk.c | 4 ++-- board/ti/ks2_evm/board_k2l.c | 4 ++-- 5 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c index 5c6051e76db8..1ae3baf982a1 100644 --- a/arch/arm/mach-keystone/clock.c +++ b/arch/arm/mach-keystone/clock.c @@ -228,14 +228,14 @@ void init_plls(void) } }
-static int get_max_speed(u32 val, u32 speed_supported) +static int get_max_speed(u32 val, u32 speed_supported, int *spds) { int speed;
/* Left most setbit gives the speed */ for (speed = DEVSPEED_NUMSPDS; speed >= 0; speed--) { if ((val & BIT(speed)) & speed_supported) - return speeds[speed]; + return spds[speed]; }
/* If no bit is set, use SPD800 */ @@ -250,24 +250,24 @@ static inline u32 read_efuse_bootrom(void) return __raw_readl(KS2_EFUSE_BOOTROM); }
-int get_max_arm_speed(void) +int get_max_arm_speed(int *spds) { u32 armspeed = read_efuse_bootrom();
armspeed = (armspeed & DEVSPEED_ARMSPEED_MASK) >> DEVSPEED_ARMSPEED_SHIFT;
- return get_max_speed(armspeed, ARM_SUPPORTED_SPEEDS); + return get_max_speed(armspeed, ARM_SUPPORTED_SPEEDS, spds); }
-int get_max_dev_speed(void) +int get_max_dev_speed(int *spds) { u32 devspeed = read_efuse_bootrom();
devspeed = (devspeed & DEVSPEED_DEVSPEED_MASK) >> DEVSPEED_DEVSPEED_SHIFT;
- return get_max_speed(devspeed, DEV_SUPPORTED_SPEEDS); + return get_max_speed(devspeed, DEV_SUPPORTED_SPEEDS, spds); }
/** diff --git a/arch/arm/mach-keystone/include/mach/clock.h b/arch/arm/mach-keystone/include/mach/clock.h index cdcff3baee36..dfebcb03ea57 100644 --- a/arch/arm/mach-keystone/include/mach/clock.h +++ b/arch/arm/mach-keystone/include/mach/clock.h @@ -124,8 +124,8 @@ struct pll_init_data *get_pll_init_data(int pll); unsigned long clk_get_rate(unsigned int clk); unsigned long clk_round_rate(unsigned int clk, unsigned long hz); int clk_set_rate(unsigned int clk, unsigned long hz); -int get_max_dev_speed(void); -int get_max_arm_speed(void); +int get_max_dev_speed(int *spds); +int get_max_arm_speed(int *spds); void pll_pa_clk_sel(void);
#endif diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c index f58f62358d3e..cbb3077bc36c 100644 --- a/board/ti/ks2_evm/board_k2e.c +++ b/board/ti/ks2_evm/board_k2e.c @@ -61,7 +61,7 @@ struct pll_init_data *get_pll_init_data(int pll)
switch (pll) { case MAIN_PLL: - speed = get_max_dev_speed(); + speed = get_max_dev_speed(speeds); data = &core_pll_config[speed]; break; case PASS_PLL: diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c index 0bd6b86e2573..e217beaed5e4 100644 --- a/board/ti/ks2_evm/board_k2hk.c +++ b/board/ti/ks2_evm/board_k2hk.c @@ -51,11 +51,11 @@ struct pll_init_data *get_pll_init_data(int pll)
switch (pll) { case MAIN_PLL: - speed = get_max_dev_speed(); + speed = get_max_dev_speed(speeds); data = &core_pll_config[speed]; break; case TETRIS_PLL: - speed = get_max_arm_speed(); + speed = get_max_arm_speed(speeds); data = &tetris_pll_config[speed]; break; case PASS_PLL: diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c index d750ad3c0b05..2a2e0057e24e 100644 --- a/board/ti/ks2_evm/board_k2l.c +++ b/board/ti/ks2_evm/board_k2l.c @@ -50,11 +50,11 @@ struct pll_init_data *get_pll_init_data(int pll)
switch (pll) { case MAIN_PLL: - speed = get_max_dev_speed(); + speed = get_max_dev_speed(speeds); data = &core_pll_config[speed]; break; case TETRIS_PLL: - speed = get_max_arm_speed(); + speed = get_max_arm_speed(speeds); data = &tetris_pll_config[speed]; break; case PASS_PLL: