From: Peng Fan peng.fan@nxp.com
Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MQ.
Signed-off-by: Peng Fan peng.fan@nxp.com --- include/configs/imx8m.h | 10 ++++++++++ include/configs/imx8mq_cm.h | 24 +----------------------- include/configs/imx8mq_evk.h | 19 +------------------ include/configs/imx8mq_phanbell.h | 19 ++----------------- include/configs/kontron_pitx_imx8m.h | 19 +------------------ include/configs/pico-imx8mq.h | 20 +------------------- 6 files changed, 16 insertions(+), 95 deletions(-)
diff --git a/include/configs/imx8m.h b/include/configs/imx8m.h index 9dc92f7b2df..7a69493a3b9 100644 --- a/include/configs/imx8m.h +++ b/include/configs/imx8m.h @@ -42,6 +42,16 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
+#elif defined(CONFIG_IMX8MQ) +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ +#define CONFIG_SPL_STACK 0x187FF0 +#define CONFIG_SPL_BSS_START_ADDR 0x00180000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ +#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 +/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ +#define CONFIG_MALLOC_F_ADDR 0x182000 #endif #endif #endif diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 34d64f7ae45..016737f0907 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -6,32 +6,10 @@ #ifndef __IMX8M_CM_H #define __IMX8M_CM_H
-#include <linux/sizes.h> -#include <linux/stringify.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (124 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 - -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 -/* For RAW image gives a error info not panic */ - -#endif - -/* ENET Config */ -/* ENET1 */ - #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 98257e8ba81..29683480be1 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -6,28 +6,11 @@ #ifndef __IMX8M_EVK_H #define __IMX8M_EVK_H
-#include <linux/sizes.h> -#include <linux/stringify.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (124 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - #ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 - -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 -/* For RAW image gives a error info not panic */ - #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #endif diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 19381b6b778..646b384f342 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -6,25 +6,10 @@ #ifndef __IMX8M_PHANBELL_H #define __IMX8M_PHANBELL_H
-#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h>
+#undef CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_MAX_SIZE (172 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 - -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 -/* For RAW image gives a error info not panic */ -#endif
/* ENET Config */ /* ENET1 */ diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index d519935b064..1b8b4671bc5 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -3,33 +3,16 @@ #ifndef __KONTRON_PITX_IMX8M_H #define __KONTRON_PITX_IMX8M_H
-#include <linux/sizes.h> -#include <linux/stringify.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K) -#define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K) - /* GUID for capsule updatable firmware image */ #define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \ EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 - -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 -/* For RAW image gives a error info not panic */ - - #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #endif diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 1de54e6431c..691e711855d 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -6,25 +6,7 @@ #ifndef __IMX8M_PICOPI_H #define __IMX8M_PICOPI_H
-#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> - -#define CONFIG_SPL_MAX_SIZE (124 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 - -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 -/* For RAW image gives a error info not panic */ -#endif +#include <configs/imx8m.h>
/* ENET Config */ /* ENET1 */