The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/uniphier-ph1-pro5-4kbox.dts | 64 ++++++++++++++++++ arch/arm/mach-uniphier/Kconfig | 9 +++ arch/arm/mach-uniphier/board_early_init_f.c | 7 ++ arch/arm/mach-uniphier/boards.c | 15 +++++ arch/arm/mach-uniphier/boot-mode/Makefile | 1 + .../mach-uniphier/boot-mode/boot-mode-ph1-pro5.c | 75 ++++++++++++++++++++++ arch/arm/mach-uniphier/boot-mode/boot-mode.c | 4 ++ arch/arm/mach-uniphier/clk/Makefile | 1 + arch/arm/mach-uniphier/clk/clk-ph1-pro5.c | 44 +++++++++++++ arch/arm/mach-uniphier/cmd_pinmon.c | 5 ++ arch/arm/mach-uniphier/debug_ll.S | 24 +++++++ arch/arm/mach-uniphier/early-clk/Makefile | 1 + .../mach-uniphier/early-clk/early-clk-ph1-pro5.c | 39 +++++++++++ arch/arm/mach-uniphier/include/mach/boot-device.h | 2 + arch/arm/mach-uniphier/include/mach/init.h | 4 ++ arch/arm/mach-uniphier/include/mach/sc-regs.h | 21 ++++++ arch/arm/mach-uniphier/include/mach/sg-regs.h | 2 +- arch/arm/mach-uniphier/init/Makefile | 1 + arch/arm/mach-uniphier/init/init-ph1-pro5.c | 42 ++++++++++++ arch/arm/mach-uniphier/init/init.c | 5 ++ arch/arm/mach-uniphier/pinctrl/Makefile | 1 + arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c | 43 +++++++++++++ arch/arm/mach-uniphier/sbc/Makefile | 1 + configs/ph1_pro5_defconfig | 30 +++++++++ doc/README.uniphier | 4 ++ 26 files changed, 445 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/uniphier-ph1-pro5-4kbox.dts create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/clk/clk-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c create mode 100644 configs/ph1_pro5_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5afe8a9..0a7d184 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld4-ref.dtb \ uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-pro5-4kbox.dtb \ uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ diff --git a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts new file mode 100644 index 0000000..912bc27 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts @@ -0,0 +1,64 @@ +/* + * Device Tree Source for UniPhier PH1-Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0) + * + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro5.dtsi" + +/ { + model = "UniPhier PH1-Pro5 4KBOX Board"; + compatible = "socionext,ph1-pro5-4kbox", "socionext,ph1-pro5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200"; + stdout-path = &serial1; + }; + + aliases { + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 2cc5dac..7a62957 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -33,6 +33,15 @@ config ARCH_UNIPHIER_PH1_SLD8 help This enables support for UniPhier PH1-sLD8 SoC.
+config ARCH_UNIPHIER_PH1_PRO5 + bool "UniPhier PH1-Pro5 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro5 SoC. + config MICRO_SUPPORT_CARD bool "Use Micro Support Card" help diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index cd516c3..fb49272 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -41,6 +41,13 @@ int board_early_init_f(void) ph1_ld4_clk_init(); break; #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_pin_init(); + led_puts("U1"); + ph1_pro5_clk_init(); + break; +#endif default: break; } diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c index 6a5ea2e..fba8859 100644 --- a/arch/arm/mach-uniphier/boards.c +++ b/arch/arm/mach-uniphier/boards.c @@ -59,6 +59,18 @@ static const struct uniphier_board_data ph1_sld8_data = { }; #endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +static const struct uniphier_board_data ph1_pro5_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1866, +}; +#endif + struct uniphier_board_id { const char *compatible; const struct uniphier_board_data *param; @@ -77,6 +89,9 @@ static const struct uniphier_board_id uniphier_boards[] = { #if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) { "socionext,ph1-sld8", &ph1_sld8_data, }, #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + { "socionext,ph1-pro5", &ph1_pro5_data, }, +#endif };
const struct uniphier_board_data *uniphier_get_board_param(const void *fdt) diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile index bd6d0a3..1d2f8b3 100644 --- a/arch/arm/mach-uniphier/boot-mode/Makefile +++ b/arch/arm/mach-uniphier/boot-mode/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += boot-mode-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c new file mode 100644 index 0000000..7b385d1 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + { /* sentinel */ } +}; + +static int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 ph1_pro5_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void ph1_pro5_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c index 71abdef..60329eb 100644 --- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -29,6 +29,10 @@ u32 spl_boot_device(void) case SOC_UNIPHIER_PH1_SLD8: return ph1_ld4_boot_device(); #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + return ph1_pro5_boot_device(); +#endif default: return BOOT_DEVICE_NONE; } diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index e6931d6..873c4f7 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c new file mode 100644 index 0000000..f78edbb --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +void ph1_pro5_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c index a61d40e..58c53bf 100644 --- a/arch/arm/mach-uniphier/cmd_pinmon.c +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -28,6 +28,11 @@ static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ph1_ld4_boot_mode_show(); break; #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_boot_mode_show(); + break; +#endif default: break; } diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S index d5ccad3..056f77e 100644 --- a/arch/arm/mach-uniphier/debug_ll.S +++ b/arch/arm/mach-uniphier/debug_ll.S @@ -101,6 +101,30 @@ ph1_pro4_end: b init_uart ph1_sld8_end: #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +#define PH1_PRO5_UART_CLK 73728000 + cmp r1, #0x2A + bne ph1_pro5_end + + sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro5_end: +#endif
init_uart: addruart r0, r1, r2 diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile index 58af1ad..939795c 100644 --- a/arch/arm/mach-uniphier/early-clk/Makefile +++ b/arch/arm/mach-uniphier/early-clk/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c new file mode 100644 index 0000000..007d3b8 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.m@jp.panasonic.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* + * deassert reset + * UMCA2: Ch1 (DDR3) + * UMCA1, UMC31: Ch0 (WIO1) + * UMCA0, UMC30: Ch0 (WIO0) + */ + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 | + SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h index eddb25f..3cbe773 100644 --- a/arch/arm/mach-uniphier/include/mach/boot-device.h +++ b/arch/arm/mach-uniphier/include/mach/boot-device.h @@ -14,8 +14,10 @@ struct boot_device_info {
u32 ph1_sld3_boot_device(void); u32 ph1_ld4_boot_device(void); +u32 ph1_pro5_boot_device(void);
void ph1_sld3_boot_mode_show(void); void ph1_ld4_boot_mode_show(void); +void ph1_pro5_boot_mode_show(void);
#endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h index 228cbb1..914182d 100644 --- a/arch/arm/mach-uniphier/include/mach/init.h +++ b/arch/arm/mach-uniphier/include/mach/init.h @@ -26,6 +26,7 @@ int ph1_sld3_init(const struct uniphier_board_data *bd); int ph1_ld4_init(const struct uniphier_board_data *bd); int ph1_pro4_init(const struct uniphier_board_data *bd); int ph1_sld8_init(const struct uniphier_board_data *bd); +int ph1_pro5_init(const struct uniphier_board_data *bd);
#if defined(CONFIG_MICRO_SUPPORT_CARD) int ph1_sld3_sbc_init(const struct uniphier_board_data *bd); @@ -63,6 +64,7 @@ int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd); int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd);
int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd); +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd);
int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd);
@@ -74,9 +76,11 @@ void ph1_sld3_pin_init(void); void ph1_ld4_pin_init(void); void ph1_pro4_pin_init(void); void ph1_sld8_pin_init(void); +void ph1_pro5_pin_init(void);
void ph1_ld4_clk_init(void); void ph1_pro4_clk_init(void); +void ph1_pro5_clk_init(void);
#define pr_err(fmt, args...) printf(fmt, ##args)
diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index 9d697b1..903e405 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -15,6 +15,10 @@ #define SC_BASE_ADDR 0x61840000 #endif
+#define SC_DPLLOSCCTRL (SC_BASE_ADDR | 0x1110) +#define SC_DPLLOSCCTRL_DPLLST (0x1 << 1) +#define SC_DPLLOSCCTRL_DPLLEN (0x1 << 0) + #define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) #define SC_DPLLCTRL_SSC_EN (0x1 << 31) #define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) @@ -43,6 +47,7 @@ #define SC_RSTCTRL_NRST_ETHER (0x1 << 12) #define SC_RSTCTRL_NRST_STDMAC (0x1 << 10) #define SC_RSTCTRL_NRST_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) #define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) #define SC_RSTCTRL_NRST_NAND (0x1 << 2) @@ -53,6 +58,15 @@
#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008)
+/* Pro5 or newer */ +#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) +#define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */ +#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */ +#define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */ +#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */ +#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */ + #define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) #define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */ #define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */ @@ -60,11 +74,18 @@ #define SC_CLKCTRL_CEN_MIO (0x1 << 11) #define SC_CLKCTRL_CEN_STDMAC (0x1 << 10) #define SC_CLKCTRL_CEN_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_CLKCTRL_CEN_UMC (0x1 << 4) #define SC_CLKCTRL_CEN_NAND (0x1 << 2) #define SC_CLKCTRL_CEN_SBC (0x1 << 1) #define SC_CLKCTRL_CEN_PERI (0x1 << 0)
+/* Pro5 or newer */ +#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) +#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */ +#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */ + /* System reset control register */ #define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) #define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index d8239f2..168b35e 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -59,7 +59,7 @@ /* Pin Control */ #define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000)
-/* Only for PH1-Pro4 */ +/* PH1-Pro4, PH1-Pro5 */ #define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700)
/* Input Enable */ diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile index dd9804d..1524a8d 100644 --- a/arch/arm/mach-uniphier/init/Makefile +++ b/arch/arm/mach-uniphier/init/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += init-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro5.c b/arch/arm/mach-uniphier/init/init-ph1-pro5.c new file mode 100644 index 0000000..92b3f21 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro5.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_pro5_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_pro5_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c index 316be02..2649e6c 100644 --- a/arch/arm/mach-uniphier/init/init.c +++ b/arch/arm/mach-uniphier/init/init.c @@ -40,6 +40,11 @@ void spl_board_init(void) ph1_sld8_init(param); break; #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_init(param); + break; +#endif default: break; } diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile index 542c670..a785245 100644 --- a/arch/arm/mach-uniphier/pinctrl/Makefile +++ b/arch/arm/mach-uniphier/pinctrl/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pinctrl-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c new file mode 100644 index 0000000..a6cc082 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_pro5_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(19, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(20, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(21, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(22, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(23, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(24, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(25, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(26, 0, 4, 8); /* XNFCE1 -> XNFCE1 */ + sg_set_pinsel(27, 0, 4, 8); /* NRYBY1 -> NRYBY1 */ + sg_set_pinsel(28, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(29, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(30, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(31, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(32, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(33, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(34, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(35, 0, 4, 8); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(124, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(125, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(126, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(127, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile index 68ffd1c..2c5fd1a 100644 --- a/arch/arm/mach-uniphier/sbc/Makefile +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o diff --git a/configs/ph1_pro5_defconfig b/configs/ph1_pro5_defconfig new file mode 100644 index 0000000..967d0f1 --- /dev/null +++ b/configs/ph1_pro5_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_UNIPHIER_PH1_PRO5=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_MICRO_SUPPORT_CARD=y +CONFIG_SYS_TEXT_BASE=0x84000000 +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro5-4kbox" +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_SPL_NAND_DENALI=y +CONFIG_UNIPHIER_SERIAL=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/doc/README.uniphier b/doc/README.uniphier index e936f40..6792327 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -44,6 +44,10 @@ PH1-sLD8: $ make ph1_sld8_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi-
+PH1-Pro5: + $ make ph1_pro5_defconfig + $ make CROSS_COMPILE=arm-linux-gnueabi- + You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-" to use your favorite compiler.