On Saturday 18 July 2009 02:01:02 Peter Tyser wrote:
The XPedite1000 is a 440gx-based PMC made by X-ES. Support was added for XPedite100 to U-Boot > 5 years ago by Travis Sawyer (travis.sawyer@sandburst.com) independent of X-ES. Sandburst was bought out by Broadcom some time ago. I attempted to contact Travis at both his old Sandburst and Broadcom email addresses but neither account still exist.
We never sold any XPedite1000's to Sandburst, so I'm not quite sure how Travis initially got his hands on one (ebay?). In any case, now that other X-ES products are supported by U-Boot I thought it would make sense to sync up the XPedite1000 with other X-ES boards. In my opinion, these changes add some functionality and are generally an improvement. No one is currently using U-Boot on the XPedite1000 that I'm aware of so I hope the changes don't affect others in a negative way.
In any case, I was hoping to take over maintainership for the board, but was never able to get the OK from Travis. I hope this is OK...
It's ok with me.
Peter Tyser (14): xpedite1k: Use standard CFI flash driver xpedite1k: Remove CONFIG_SYS_DRAM_TEST support xpedite1k: Remove support for fixed SDRAM configuration xpedite1k: Remove support for reading MACs from EEPROM xpedite1k: Cleanup coding style xpedite1k: Add support for optional flashes xpedite1k: Add support for additional GPIO pins xpedite1k: Store environment in flash xpedite1k: Disable unused ethernet port 1 xpedite1k: Sync up commands and environment with other X-ES boards xpedite1k: Sync organization of board config with other X-ES boards xpedite1k: Sync up board config options with other X-ES boards xpedite1k: Sync checkboard() with other X-ES boards xpedite1k: Move to X-ES vendor directory
All 14 patches applied to ppc4xx. Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================