From: Bhupesh Sharma bhupesh.linux@gmail.com
Some Qualcomm SoCs newer than SDM845 feature a so-called "7nm phy" driver, notable the SM8250 SoC which will gain U-Boot support in upcoming patches.
Introduce a driver based on the Linux driver.
Signed-off-by: Bhupesh Sharma bhupesh.sharma@linaro.org [code cleanup, align symbol names with Linux, switch to clk/reset_bulk APIs] Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- drivers/phy/qcom/Kconfig | 8 ++ drivers/phy/qcom/Makefile | 1 + drivers/phy/qcom/phy-qcom-snps-femto-v2.c | 207 ++++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+)
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig index 361dfb6e1126..b9fe608c2798 100644 --- a/drivers/phy/qcom/Kconfig +++ b/drivers/phy/qcom/Kconfig @@ -18,8 +18,16 @@ config PHY_QCOM_QUSB2 help Enable this to support the Super-Speed USB transceiver on various Qualcomm chipsets.
+config PHY_QCOM_USB_SNPS_FEMTO_V2 + tristate "Qualcomm SNPS FEMTO USB HS PHY v2" + depends on PHY && ARCH_SNAPDRAGON + help + Enable this to support the Qualcomm Synopsys DesignWare Core 7nm + High-Speed PHY driver. This driver supports the Hi-Speed PHY which + is usually paired with Synopsys DWC3 USB IPs on MSM SOCs. + config PHY_QCOM_USB_HS_28NM tristate "Qualcomm 28nm High-Speed PHY" depends on PHY && ARCH_SNAPDRAGON help diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile index f6af985666a4..5f4db4a53788 100644 --- a/drivers/phy/qcom/Makefile +++ b/drivers/phy/qcom/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o +obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o diff --git a/drivers/phy/qcom/phy-qcom-snps-femto-v2.c b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c new file mode 100644 index 000000000000..eda80b96b0a9 --- /dev/null +++ b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (C) 2023 Bhupesh Sharma bhupesh.sharma@linaro.org + * + * Based on Linux driver + */ + +#include <clk.h> +#include <clk-uclass.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <generic-phy.h> +#include <malloc.h> +#include <reset.h> + +#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/iopoll.h> + +#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NORMAL (0x00) +#define OPMODE_NONDRIVING BIT(3) +#define TERMSEL BIT(5) + +#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define SIDDQ BIT(2) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(6, 4) +#define FSEL_DEFAULT (0x3 << 4) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58) +#define VBUSVLDEXTSEL0 BIT(4) +#define PLLBTUNE BIT(5) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c) +#define VREGBYPASS BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60) +#define VBUSVLDEXT0 BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_AUTO_RESUME BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB2_PHY_USB_PHY_CFG0 (0x94) +#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0) +#define REFCLK_SEL_MASK GENMASK(1, 0) +#define REFCLK_SEL_DEFAULT (0x2 << 0) + +struct qcom_snps_hsphy { + void __iomem *base; + struct clk_bulk clks; + struct reset_ctl_bulk resets; +}; + +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + + reg &= ~mask; + reg |= val & mask; + writel_relaxed(reg, base + offset); + + /* Ensure above write is completed */ + readl_relaxed(base + offset); +} + +static int qcom_snps_hsphy_usb_init(struct phy *phy) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN); + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL5, POR, + POR); + qcom_snps_hsphy_write_mask( + priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, 0); + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + PLLBTUNE, PLLBTUNE); + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_REFCLK_CTRL, + REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK); + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + VBUSVLDEXTSEL0, VBUSVLDEXTSEL0); + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, + VBUSVLDEXT0, VBUSVLDEXT0); + + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, + VREGBYPASS, VREGBYPASS); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL0, + SLEEPM, SLEEPM); + + qcom_snps_hsphy_write_mask( + priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL5, POR, + 0); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0); + + return 0; +} + +static int qcom_snps_hsphy_power_on(struct phy *phy) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev); + int ret; + + clk_enable_bulk(&priv->clks); + + ret = reset_deassert_bulk(&priv->resets); + if (ret) + return ret; + + ret = qcom_snps_hsphy_usb_init(phy); + if (ret) + return ret; + + return 0; +} + +static int qcom_snps_hsphy_power_off(struct phy *phy) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev); + + reset_assert_bulk(&priv->resets); + clk_disable_bulk(&priv->clks); + + return 0; +} + +static int qcom_snps_hsphy_phy_probe(struct udevice *dev) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(dev); + int ret; + + priv->base = dev_read_addr_ptr(dev); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + ret = clk_get_bulk(dev, &priv->clks); + if (ret < 0 && ret != -ENOENT) { + printf("%s: Failed to get clocks %d\n", __func__, ret); + return ret; + } + + ret = reset_get_bulk(dev, &priv->resets); + if (ret < 0) { + printf("failed to get resets, ret = %d\n", ret); + return ret; + } + + clk_enable_bulk(&priv->clks); + reset_deassert_bulk(&priv->resets); + + return 0; +} + +static struct phy_ops qcom_snps_hsphy_phy_ops = { + .power_on = qcom_snps_hsphy_power_on, + .power_off = qcom_snps_hsphy_power_off, +}; + +static const struct udevice_id qcom_snps_hsphy_phy_ids[] = { + { .compatible = "qcom,sm8150-usb-hs-phy" }, + { .compatible = "qcom,usb-snps-hs-5nm-phy" }, + { .compatible = "qcom,usb-snps-hs-7nm-phy" }, + { .compatible = "qcom,usb-snps-femto-v2-phy" }, + {} +}; + +U_BOOT_DRIVER(qcom_usb_qcom_snps_hsphy) = { + .name = "qcom-snps-hsphy", + .id = UCLASS_PHY, + .of_match = qcom_snps_hsphy_phy_ids, + .ops = &qcom_snps_hsphy_phy_ops, + .probe = qcom_snps_hsphy_phy_probe, + .priv_auto = sizeof(struct qcom_snps_hsphy), +};