From: Alessandro Rubini rubini@unipv.it
This trivially enables Ethernet support in the debug board by setting up the proper chip select.
Signed-off-by: Alessandro Rubini rubini@unipv.it Acked-by: Andrea Gallo andrea.gallo@stnwireless.com --- board/st/nmdk8815/nmdk8815.c | 5 ++++- include/configs/nmdk8815.h | 3 +++ 2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/board/st/nmdk8815/nmdk8815.c b/board/st/nmdk8815/nmdk8815.c index c54eac1..9a7242f 100644 --- a/board/st/nmdk8815/nmdk8815.c +++ b/board/st/nmdk8815/nmdk8815.c @@ -49,8 +49,11 @@ int board_init(void) writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28); writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
- icache_enable(); + /* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */ + writel(0x0000305b, NOMADIK_FSMC_BASE + 0x08); /* FSMC_BCR1 */ + writel(0x00033f33, NOMADIK_FSMC_BASE + 0x0c); /* FSMC_BTR1 */
+ icache_enable(); return 0; }
diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h index 7a503e0..23a7323 100644 --- a/include/configs/nmdk8815.h +++ b/include/configs/nmdk8815.h @@ -35,8 +35,11 @@
/* commands */ #include <config_cmd_default.h> + +#define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS /* There is no NOR flash, so undefine these commands */ #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS