Greetings everybody,
The changes to the adin phy device-tree bindings and driver have been applied to netdev/net-next: https://patchwork.kernel.org/project/netdevbpf/cover/20220517085143.3749-1-j...
As there have been no further comments, I will send v2 soon including some changes the Linux maintainers asked for - and drop the first patch now that Nate Drude has submitted a fix: phy: adin: fix broken support for adi,phy-mode-override
sincerely Josua Mayer
Am 01.05.22 um 15:41 schrieb Josua Mayer:
As of Revision 1.9 the SolidRun i.MX6 SoMs ship with a new PHY - an ADIN1300 at address 1. This patchset carries many small parts to facilitate proper operation of the ethernet port in U-Boot as well as Linux:
- Fix a compile error in the recently phy driver
- Add support for configuring the clock output pins to the phy driver
- update device-tree with support for the neew phy
- support runtime patching of device-tree for Linux: enables only the phy node detected during boot, to avoid warning messages during boot.
- finally enable the phy driver in the cuboxi defconfig
Josua Mayer (5): phy: adin: remove broken support for adi,phy-mode-override phy: adin: add support for clock output ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS mx6cuboxi: enable driver for adin1300 phy
arch/arm/dts/imx6qdl-sr-som.dtsi | 17 +++++- board/solidrun/mx6cuboxi/mx6cuboxi.c | 78 +++++++++++++++++++++++++++ configs/mx6cuboxi_defconfig | 2 + drivers/net/phy/adin.c | 80 ++++++++++++++++------------ 4 files changed, 141 insertions(+), 36 deletions(-)