On Wednesday 20 May 2009 15:40:00 Prafulla Wadaskar wrote:
I would like to give your Kirkwood support a try and start compiling the latest version before trying to port a custom board. Now I'm failing to compile the latest version posted on the list. Most likely I missed some patches or applied them to the wrong git repository.
Thanks Stefan, your efforts will help me a lot
Sure. I'll try to help out if possible. But I'm only starting into this project right now. So please don't expect any "real output" soon. But I definitely can give some feedback...
I tried it on u-boot/next and on u-boot-arm/next. Both
I have used u-boot-arm/next pls use the same.
OK, understood.
failed. I applied those patches:
[PATCH v8] Marvell Kirkwood family SOC support [PATCH v9] Marvell MV88F6281GTW_GE Board support [PATCH v3] Gbe Controller driver support for kirkwood SOCs
It would be great if you could tell me what I am missing here (additional patches or wrong repository?).
You will need additional two patches as mentioned below http://git.denx.de/?p=u-boot/u-boot-blackfin.git;a=commit;h=12cedeb9589ef12 03e3308e80b11e5ee73261ced http://lists.denx.de/pipermail/u-boot/2009-May/052905.html
Apart from this pls add below line to drivers/net/kirkwood_egiga.c remove below mentioned errors #include <asm/arch/kirkwood.h>
I hope build will be through... Best of Luck
Yes, this works. Thanks a lot.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================