Adds the mmc hwpartition sub-command to perform eMMC hardware partitioning on an mmc device. The number of arguments can be large for a complex partitioning, but as the partitioning has to be done in one go it is difficult to make it simpler. --- common/cmd_mmc.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 91 insertions(+), 1 deletions(-)
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 7b7167c..3943fb7 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -481,6 +481,90 @@ static int do_mmc_list(cmd_tbl_t *cmdtp, int flag, print_mmc_devices('\n'); return CMD_RET_SUCCESS; } + +static int do_mmc_hwpartition(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + struct mmc *mmc; + struct mmc_hwpart_conf pconf = { }; + enum mmc_hwpart_conf_mode mode = MMC_HWPART_CONF_CHECK; + int i, pidx; + + mmc = init_mmc_device(curr_device, false); + if (!mmc) + return CMD_RET_FAILURE; + + if (argc < 1) + return CMD_RET_USAGE; + i = 1; + while (i < argc) { + if (!strcmp(argv[i], "userenh")) { + if (i + 2 >= argc) + return CMD_RET_USAGE; + pconf.user_enh_start = + simple_strtoul(argv[i+1], NULL, 10); + pconf.user_enh_size = + simple_strtoul(argv[i+2], NULL, 10); + i += 3; + } else if (!strncmp(argv[i], "gp", 2) && + strlen(argv[i]) == 3 && + argv[i][2] >= '1' && argv[i][2] <= '4') { + if (i + 1 >= argc) + return CMD_RET_USAGE; + pidx = argv[i][2] - '1'; + pconf.gp_part[pidx].size = + simple_strtoul(argv[i+1], NULL, 10); + if (i + 2 < argc && !strcmp(argv[i+2], "enh")) { + pconf.gp_part[pidx].enhanced = 1; + i += 3; + } else { + pconf.gp_part[pidx].enhanced = 0; + i += 2; + } + } else if (!strcmp(argv[i], "check")) { + mode = MMC_HWPART_CONF_CHECK; + i++; + } else if (!strcmp(argv[i], "set")) { + mode = MMC_HWPART_CONF_SET; + i++; + } else if (!strcmp(argv[i], "complete")) { + mode = MMC_HWPART_CONF_COMPLETE; + i++; + } else { + return CMD_RET_USAGE; + } + } + + puts("Partition configuration:\n"); + if (pconf.user_enh_size) { + puts("\tUser Enhanced Start: "); + print_size(((u64)pconf.user_enh_start) << 9, "\n"); + puts("\tUser Enhanced Size: "); + print_size(((u64)pconf.user_enh_size) << 9, "\n"); + } else { + puts("\tNo enhanced user data area\n"); + } + for (pidx = 0; pidx < 4; pidx++) { + if (pconf.gp_part[pidx].size) { + printf("\tGP%i Capacity: ", pidx+1); + print_size(((u64)pconf.gp_part[pidx].size) << 9, + pconf.gp_part[pidx].enhanced ? + " ENH\n" : "\n"); + } else { + printf("\tNo GP%i partition\n", pidx+1); + } + } + + if (!mmc_hwpart_config(mmc, &pconf, mode)) { + if (mode == MMC_HWPART_CONF_COMPLETE) + puts("Partitioning successful, " + "power-cycle to make effective\n"); + return CMD_RET_SUCCESS; + } else { + return CMD_RET_FAILURE; + } +} + #ifdef CONFIG_SUPPORT_EMMC_BOOT static int do_mmc_bootbus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -638,6 +722,7 @@ static cmd_tbl_t cmd_mmc[] = { U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""), U_BOOT_CMD_MKENT(dev, 3, 0, do_mmc_dev, "", ""), U_BOOT_CMD_MKENT(list, 1, 1, do_mmc_list, "", ""), + U_BOOT_CMD_MKENT(hwpartition, 17, 0, do_mmc_hwpartition, "", ""), #ifdef CONFIG_SUPPORT_EMMC_BOOT U_BOOT_CMD_MKENT(bootbus, 5, 0, do_mmc_bootbus, "", ""), U_BOOT_CMD_MKENT(bootpart-resize, 4, 0, do_mmc_boot_resize, "", ""), @@ -677,7 +762,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) }
U_BOOT_CMD( - mmc, 7, 1, do_mmcops, + mmc, 18, 1, do_mmcops, "MMC sub system", "info - display info of the current MMC device\n" "mmc read addr blk# cnt\n" @@ -687,6 +772,11 @@ U_BOOT_CMD( "mmc part - lists available partition on current mmc device\n" "mmc dev [dev] [part] - show or set current mmc device [partition]\n" "mmc list - lists available devices\n" + "mmc hwpartition [args...] - does hardware partitioning\n" + " arguments (sizes in 512-byte blocks):\n" + " [userenh start cnt] - sets enhanced user data area\n" + " [gp1|gp2|gp3|gp4 cnt [enh]] - general purpose partition\n" + " [check|set|complete] - mode, complete set partitioning completed\n" #ifdef CONFIG_SUPPORT_EMMC_BOOT "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n" " - Set the BOOT_BUS_WIDTH field of the specified device\n"