Now that the entire dwc3 driver is adapted to compile with uboot build, modify the Makefiles so that the dwc3 driver can be built.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com --- Makefile | 2 ++ drivers/usb/dwc3/Makefile | 35 +++-------------------------------- drivers/usb/gadget/udc/Makefile | 2 +- 3 files changed, 6 insertions(+), 33 deletions(-)
diff --git a/Makefile b/Makefile index 1eb6821..ca0fd76 100644 --- a/Makefile +++ b/Makefile @@ -632,8 +632,10 @@ libs-y += drivers/spi/ libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ libs-y += drivers/serial/ +libs-y += drivers/usb/dwc3/ libs-y += drivers/usb/eth/ libs-y += drivers/usb/gadget/ +libs-y += drivers/usb/gadget/udc/ libs-y += drivers/usb/host/ libs-y += drivers/usb/musb/ libs-y += drivers/usb/musb-new/ diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index afaa767..e455a52 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -1,37 +1,8 @@ -ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG -ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG - obj-$(CONFIG_USB_DWC3) += dwc3.o
-dwc3-y := core.o debug.o - -ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),) - dwc3-y += host.o -endif - -ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),) - dwc3-y += gadget.o ep0.o -endif - -ifneq ($(CONFIG_DEBUG_FS),) - dwc3-y += debugfs.o -endif +dwc3-y := core.o
-## -# Platform-specific glue layers go here -# -# NOTICE: Make sure your glue layer doesn't depend on anything -# which is arch-specific and that it compiles on all situations. -# -# We want to keep this requirement in order to be able to compile -# the entire driver (with all its glue layers) on several architectures -# and make sure it compiles fine. This will also help with allmodconfig -# and allyesconfig builds. -## +dwc3-y += gadget.o ep0.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o -obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o -obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o -obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o -obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o -obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o +obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index be265aa..12380f4 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -1,4 +1,4 @@ # # USB peripheral controller drivers # -obj-$(CONFIG_USB_GADGET) += udc-core.o +obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o