29 Mar
2006
29 Mar
'06
10:18 p.m.
In message 4F9B2712E6C4C74582548D2260EE1D2D9E2469@ct11exm64.ds.mot.com you wrote:
After I built my changes with U-Boot and flashed the image, I turn on the board and get the following message:
U-Boot 1.1.3 (Mar 28 2006 - 17:48:08)
U-Boot code: 80E80000 -> 80EA1450 BSS: -> 80ECC518 OMAP2430C-GP revision 0, PRCM #5A TI 2430SDP Base Board + 0.1 Version + mDDR RAM Configuration: Bank #0: 80000000 128 MB Bank #1: 88000000 0 kB Flash: 64 MB NAND:64 MB *** Warning - bad CRC, using default environment
This message is coming from common/env_common.c file. Can anyone help me identify the mistake?
What are you complaining about? I don't see any evidence of a problem in this output. Did you read the FAQ?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Man is the best computer we can put aboard a spacecraft ... and the
only one that can be mass produced with unskilled labor.
- Wernher von Braun