This patch fixes the hello_world example to be able to run it on a AT91SAM9261-EK board.
Signed-off-by: Remy Bohmer linux@bohmer.net --- README | 4 +++- examples/Makefile | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-)
Index: u-boot-usb.new/examples/Makefile =================================================================== --- u-boot-usb.new.orig/examples/Makefile 2008-12-04 22:01:14.000000000 +0100 +++ u-boot-usb.new/examples/Makefile 2008-12-04 22:01:20.000000000 +0100 @@ -33,9 +33,13 @@ ifeq ($(ARCH),arm) ifeq ($(BOARD),omap2420h4) LOAD_ADDR = 0x80300000 else +ifeq ($(BOARD),at91sam9261ek) +LOAD_ADDR = 0x21400000 +else LOAD_ADDR = 0xc100000 endif endif +endif
ifeq ($(ARCH),mips) LOAD_ADDR = 0x80200000 -T mips.lds Index: u-boot-usb.new/README =================================================================== --- u-boot-usb.new.orig/README 2008-12-04 22:01:14.000000000 +0100 +++ u-boot-usb.new/README 2008-12-04 22:01:20.000000000 +0100 @@ -3568,7 +3568,9 @@ Two simple examples are included with th
'examples/hello_world.c' contains a small "Hello World" Demo application; it is automatically compiled when you build U-Boot. -It's configured to run at address 0x00040004, so you can play with it +The address it will run on is determined by the LOAD_ADDR for +your board in examples/Makefile. +If it's configured to run at address 0x00040004, you can play with it like that:
=> loads