Hi Marek,
From: Marek Vasut marex@denx.de Sent: lundi 13 janvier 2020 12:08
On 1/13/20 11:58 AM, Patrick DELAUNAY wrote:
Hi Marek,
From: Marek Vasut marex@denx.de Sent: vendredi 10 janvier 2020 01:29
Setting TARGET_STM32MP1 in Kconfig always forces SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME to values set by the ST reference platforms. Allow changing that by pulling out the TARGET_STM32MP157C_DK2 and making the ST reference platform settings conditional on TARGET_STM32MP157C_DK2 . Other platforms can now define a different TARGET_ and thus override the SYS_ settings in their Kconfig.
Reviewed-by: Patrick Delaunay patrick.delaunay@st.com
It seens my configuration between SOC (STM32MP15x) and BOARD is not
clean...
So I prepare a patchset to change it. But I will apply it after your serie... to avoid regression on your board
Regards Patrick
Can you apply whatever you feel applicable from the series I posted and push it to some git repo, so I don't have to reset all things over and over again ?
Sure.
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git
=> branch master : the paches accepted [V3] stm32mp1: configs: Make all boot devices in distro boot conditional
[2/5] ARM: stm32: Allow overriding setup_mac_address() They will be included in my next pull request
=> branch next + my serie = http://patchwork.ozlabs.org/project/uboot/list/?series=152828 + your serie (including my proposals of update) http://patchwork.ozlabs.org/project/uboot/list/?series=152293
[3/5] ARM: stm32: Fill in missing loadaddr => I change address to 0xc2000000
[5/5] ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board I make a lot of modification after my serie and my review....
Can you check the delta and tell me if it is working...
NB: no more needed after my serie => [1/5] ARM: stm32: Permit multiple board targets i
PS: [4/5] ARM: dts: stm32: Add missing ETHCK clock to ethernet node I ma waiting Christophe / kernel feedback....
Patrick