This information help with debugging issues with uart.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/serial/serial_zynq.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 74c449663bc7..3e2b8dc183e4 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -27,14 +27,14 @@ DECLARE_GLOBAL_DATA_PTR; #define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
struct uart_zynq { - u32 control; /* Control Register [8:0] */ - u32 mode; /* Mode Register [10:0] */ + u32 control; /* 0x0 - Control Register [8:0] */ + u32 mode; /* 0x4 - Mode Register [10:0] */ u32 reserved1[4]; - u32 baud_rate_gen; /* Baud Rate Generator [15:0] */ + u32 baud_rate_gen; /* 0x18 - Baud Rate Generator [15:0] */ u32 reserved2[4]; - u32 channel_sts; /* Channel Status [11:0] */ - u32 tx_rx_fifo; /* FIFO [15:0] or [7:0] */ - u32 baud_rate_divider; /* Baud Rate Divider [7:0] */ + u32 channel_sts; /* 0x2c - Channel Status [11:0] */ + u32 tx_rx_fifo; /* 0x30 - FIFO [15:0] or [7:0] */ + u32 baud_rate_divider; /* 0x34 - Baud Rate Divider [7:0] */ };
static struct uart_zynq *uart_zynq_ports[2] = { -- 1.8.2.3