As part of EP setup, we want to set the config ready bit of controller, so that RC can read the config space of EP. Now, when we set the config ready bit we are inadvertently clearing the LTSSM_EN bit in same register, which restarts the link tarining between RC and EP. Therefore, just set the desired CFG_READY bit (bit 0), while leaving the other bits unchanged.
Signed-off-by: Pankaj Bansal pankaj.bansal@nxp.com --- drivers/pci/pcie_layerscape.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index d8a7b7c865..bb2ec7c2ce 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -407,7 +407,11 @@ static void ls_pcie_ep_setup_bars(void *bar_base)
static void ls_pcie_ep_enable_cfg(struct ls_pcie *pcie) { - ctrl_writel(pcie, PCIE_CONFIG_READY, PCIE_PF_CONFIG); + u32 config; + + config = ctrl_readl(pcie, PCIE_PF_CONFIG); + config |= PCIE_CONFIG_READY; + ctrl_writel(pcie, config, PCIE_PF_CONFIG); }
static void ls_pcie_setup_ep(struct ls_pcie *pcie)