On Thursday 14 July 2022 01:49:59 Pali Rohár wrote:
On Tuesday 28 June 2022 20:07:48 Pali Rohár wrote:
On Thursday 23 June 2022 19:17:55 Pali Rohár wrote:
On Saturday 04 June 2022 15:02:38 Pali Rohár wrote:
On Wednesday 18 May 2022 12:53:20 Pali Rohár wrote:
On Wednesday 11 May 2022 22:59:28 Pali Rohár wrote:
On Monday 25 April 2022 14:36:14 Pali Rohár wrote: > On Monday 25 April 2022 05:25:34 Priyanka Jain (OSS) wrote: > > >-----Original Message----- > > >From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Pali Rohár > > >Sent: Tuesday, April 5, 2022 7:11 PM > > >To: Priyanka Jain priyanka.jain@nxp.com; Qiang Zhao qiang.zhao@nxp.com; > > >Shengzhou Liu shengzhou.liu@nxp.com; Alexander Graf agraf@csgraf.de; > > >Bin Meng bmeng.cn@gmail.com; Wolfgang Denk wd@denx.de; Sinan > > >Akman sinan@writeme.com > > >Cc: u-boot@lists.denx.de > > >Subject: [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre- > > >PBL eSDHC boot sector > > > > > >QorIQ U-Boot binary for SD card booting compiled during build process (either u- > > >boot.bin or u-boot-with-spl.bin) cannot be directly loaded by QorIQ pre-PBL > > >BootROM. Compiled U-Boot binary first needs to be processed by Freescale > > >boot_format tool as described in doc/README.mpc85xx-sd-spi-boot > > > > > >BootROM requires that image on SD card must contain special boot sector. > > >Implement support for generating this special boot sector directly in U-Boot start > > >code. Boot sector needs to be at the beginning of the image, so when compiling > > >only proper U-Boot without SPL then it needs to be in proper U-Boot. When > > >compiling SPL with proper U-Boot then it needs to be only in SPL. > > > > > >Support can be enabled by a new config option > > >FSL_PREPBL_ESDHC_BOOT_SECTOR. > > >Via other two additional options FSL_PREPBL_ESDHC_BOOT_SECTOR_START and > > >FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA it is possible to tune how final U-Boot > > >image could be stored on the SD card. > > > > > >Signed-off-by: Pali Rohár pali@kernel.org > > >--- > > > > Kindly rebase the series to master. > > > > Regards > > Priyanka > > Hello! Both patches still applies cleanly on master, just they depend > on another patch series (powerpc: mpc85xx: Fix and cleanup mpc85xx code) > which I mentioned in cover letter and therefore needs V2 patch of > "powerpc: mpc85xx: Set TEXT_BASE addresses to real base values" which I > sent recently.
I sent a new version v2 of this patch, see email: [PATCH v2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector
Priyanka: PING
PING?
PING?
PING?
V2 now and still applies cleanly on top of next branch https://patchwork.ozlabs.org/project/uboot/patch/20220511185731.3000-1-pali@...
PING?
PING?
And why v2 has "Changes Requested" state in above patchwork?
I do not see any comment for v2 on mailing list nor on patchwork. So what is requested from me?