From: Andrew Bradford andrew.bradford@kodakalaris.com
Allow for configuration of FSP UPD from the device tree which will override any settings which the FSP was built with itself.
Modify the MinnowMax and BayleyBay boards to transfer sensible UPD settings from the Intel FSPv4 Gold release to the respective dts files, with the condition that the memory-down parameters for MinnowMax are also used.
Signed-off-by: Andrew Bradford andrew.bradford@kodakalaris.com ---
Changes from v3: - Fix small typographical issues (lowercase hex numbers, grammar, etc), no functional changes.
Changes from v2: - Switch to using booleans in dts, where appropriate. - Add Bayley Bay dts modifications. - Clarify docs to show bool versus int properties. - Include enable-igt property from FSPv4.
Changes from v1: - Use "-" rather than "_" in dt property names. - Use "Bay Trail" for the formal name of the Intel product family. - Use an "fsp," prefix for dt property names for clarity. - Fix minor code indentation issues. - Create a dt subnode for the memory-down-params. - Clarify documentation that dt overrides the FSP's config, so we don't use booleans.
arch/x86/cpu/baytrail/fsp_configs.c | 167 +++++++++++++++++---- arch/x86/dts/bayleybay.dts | 40 +++++ arch/x86/dts/minnowmax.dts | 58 +++++++ .../misc/intel,baytrail-fsp.txt | 158 +++++++++++++++++++ include/fdtdec.h | 2 + lib/fdtdec.c | 2 + 6 files changed, 397 insertions(+), 30 deletions(-) create mode 100644 doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
diff --git a/arch/x86/cpu/baytrail/fsp_configs.c b/arch/x86/cpu/baytrail/fsp_configs.c index 86b6926..ba56ebb 100644 --- a/arch/x86/cpu/baytrail/fsp_configs.c +++ b/arch/x86/cpu/baytrail/fsp_configs.c @@ -1,14 +1,18 @@ /* * Copyright (C) 2013, Intel Corporation * Copyright (C) 2014, Bin Meng bmeng.cn@gmail.com + * Copyright (C) 2015, Kodak Alaris, Inc * * SPDX-License-Identifier: Intel */
#include <common.h> +#include <fdtdec.h> #include <asm/arch/fsp/azalia.h> #include <asm/fsp/fsp_support.h>
+DECLARE_GLOBAL_DATA_PTR; + /* ALC262 Verb Table - 10EC0262 */ static const uint32_t verb_table_data13[] = { /* Pin Complex (NID 0x11) */ @@ -116,41 +120,144 @@ const struct pch_azalia_config azalia_config = { .reset_wait_timer_us = 300 };
+/** + * Override the FSP's UPD. + * If the device tree does not specify an integer setting, use the default + * provided in Intel's Baytrail_FSP_Gold4.tgz release FSP/BayleyBayFsp.bsf file. + */ void update_fsp_upd(struct upd_region *fsp_upd) { struct memory_down_data *mem; + const void *blob = gd->fdt_blob; + int node;
- /* - * Configure everything here to avoid the poor hard-pressed user - * needing to run Intel's binary configuration tool. It may also allow - * us to support the 1GB single core variant easily. - * - * TODO(sjg@chromium.org): Move to device tree - */ - fsp_upd->mrc_init_tseg_size = 8; - fsp_upd->mrc_init_mmio_size = 0x800; - fsp_upd->emmc_boot_mode = 0xff; - fsp_upd->enable_sdio = 1; - fsp_upd->enable_sdcard = 1; - fsp_upd->enable_hsuart0 = 1; fsp_upd->azalia_config_ptr = (uint32_t)&azalia_config; - fsp_upd->enable_i2_c0 = 0; - fsp_upd->enable_i2_c2 = 0; - fsp_upd->enable_i2_c3 = 0; - fsp_upd->enable_i2_c4 = 0; - fsp_upd->enable_xhci = 0; - fsp_upd->igd_render_standby = 1; + + node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_BAYTRAIL_FSP); + if (node < 0) { + debug("%s: Cannot find FSP node\n", __func__); + return; + } + + fsp_upd->mrc_init_tseg_size = fdtdec_get_int(blob, node, + "fsp,mrc-init-tseg-size", + 0); + fsp_upd->mrc_init_mmio_size = fdtdec_get_int(blob, node, + "fsp,mrc-init-mmio-size", + 0x800); + fsp_upd->mrc_init_spd_addr1 = fdtdec_get_int(blob, node, + "fsp,mrc-init-spd-addr1", + 0xa0); + fsp_upd->mrc_init_spd_addr2 = fdtdec_get_int(blob, node, + "fsp,mrc-init-spd-addr2", + 0xa2); + fsp_upd->emmc_boot_mode = fdtdec_get_int(blob, node, + "fsp,emmc-boot-mode", 2); + fsp_upd->enable_sdio = fdtdec_get_bool(blob, node, "fsp,enable-sdio"); + fsp_upd->enable_sdcard = fdtdec_get_bool(blob, node, + "fsp,enable-sdcard"); + fsp_upd->enable_hsuart0 = fdtdec_get_bool(blob, node, + "fsp,enable-hsuart0"); + fsp_upd->enable_hsuart1 = fdtdec_get_bool(blob, node, + "fsp,enable-hsuart1"); + fsp_upd->enable_spi = fdtdec_get_bool(blob, node, "fsp,enable-spi"); + fsp_upd->enable_sata = fdtdec_get_bool(blob, node, "fsp,enable-sata"); + fsp_upd->sata_mode = fdtdec_get_int(blob, node, "fsp,sata-mode", 1); + fsp_upd->enable_azalia = fdtdec_get_bool(blob, node, + "fsp,enable-azalia"); + fsp_upd->enable_xhci = fdtdec_get_bool(blob, node, "fsp,enable-xhci"); + fsp_upd->enable_lpe = fdtdec_get_bool(blob, node, "fsp,enable-lpe"); + fsp_upd->lpss_sio_enable_pci_mode = fdtdec_get_bool(blob, node, + "fsp,lpss-sio-enable-pci-mode"); + fsp_upd->enable_dma0 = fdtdec_get_bool(blob, node, "fsp,enable-dma0"); + fsp_upd->enable_dma1 = fdtdec_get_bool(blob, node, "fsp,enable-dma1"); + fsp_upd->enable_i2_c0 = fdtdec_get_bool(blob, node, "fsp,enable-i2c0"); + fsp_upd->enable_i2_c1 = fdtdec_get_bool(blob, node, "fsp,enable-i2c1"); + fsp_upd->enable_i2_c2 = fdtdec_get_bool(blob, node, "fsp,enable-i2c2"); + fsp_upd->enable_i2_c3 = fdtdec_get_bool(blob, node, "fsp,enable-i2c3"); + fsp_upd->enable_i2_c4 = fdtdec_get_bool(blob, node, "fsp,enable-i2c4"); + fsp_upd->enable_i2_c5 = fdtdec_get_bool(blob, node, "fsp,enable-i2c5"); + fsp_upd->enable_i2_c6 = fdtdec_get_bool(blob, node, "fsp,enable-i2c6"); + fsp_upd->enable_pwm0 = fdtdec_get_bool(blob, node, "fsp,enable-pwm0"); + fsp_upd->enable_pwm1 = fdtdec_get_bool(blob, node, "fsp,enable-pwm1"); + fsp_upd->enable_hsi = fdtdec_get_bool(blob, node, "fsp,enable-hsi"); + fsp_upd->igd_dvmt50_pre_alloc = fdtdec_get_int(blob, node, + "fsp,igd-dvmt50-pre-alloc", + 2); + fsp_upd->aperture_size = fdtdec_get_int(blob, node, "fsp,aperture-size", + 2); + fsp_upd->gtt_size = fdtdec_get_int(blob, node, "fsp,gtt-size", 2); + fsp_upd->serial_debug_port_address = fdtdec_get_int(blob, node, + "fsp,serial-debug-port-address", + 0x3f8); + fsp_upd->serial_debug_port_type = fdtdec_get_int(blob, node, + "fsp,serial-debug-port-type", + 1); + fsp_upd->mrc_debug_msg = fdtdec_get_bool(blob, node, + "fsp,mrc-debug-msg"); + fsp_upd->isp_enable = fdtdec_get_bool(blob, node, "fsp,isp-enable"); + fsp_upd->scc_enable_pci_mode = fdtdec_get_bool(blob, node, + "fsp,scc-enable-pci-mode"); + fsp_upd->igd_render_standby = fdtdec_get_bool(blob, node, + "fsp,igd-render-standby"); + fsp_upd->txe_uma_enable = fdtdec_get_bool(blob, node, + "fsp,txe-uma-enable"); + fsp_upd->os_selection = fdtdec_get_int(blob, node, "fsp,os-selection", 4); + fsp_upd->emmc45_ddr50_enabled = fdtdec_get_bool(blob, node, + "fsp,emmc45-ddr50-enabled"); + fsp_upd->emmc45_hs200_enabled = fdtdec_get_bool(blob, node, + "fsp,emmc45-hs200-enabled"); + fsp_upd->emmc45_retune_timer_value = fdtdec_get_int(blob, node, + "fsp,emmc45-retune-timer-value", + 8); + fsp_upd->enable_igd = fdtdec_get_bool(blob, node, "fsp,enable-igd");
mem = &fsp_upd->memory_params; - mem->enable_memory_down = 1; - mem->dram_speed = 1; - mem->dimm_width = 1; - mem->dimm_density = 2; - mem->dimm_tcl = 0xb; - mem->dimm_trpt_rcd = 0xb; - mem->dimm_twr = 0xc; - mem->dimm_twtr = 6; - mem->dimm_trrd = 6; - mem->dimm_trtp = 6; - mem->dimm_tfaw = 0x14; + mem->enable_memory_down = fdtdec_get_bool(blob, node, + "fsp,enable-memory-down"); + if (mem->enable_memory_down) { + node = fdtdec_next_compatible(blob, node, + COMPAT_INTEL_BAYTRAIL_FSP_MDP); + if (node < 0) { + debug("%s: Cannot find FSP memory-down-params node\n", + __func__); + } else { + mem->dram_speed = fdtdec_get_int(blob, node, + "fsp,dram-speed", + 0x02); + mem->dram_type = fdtdec_get_int(blob, node, + "fsp,dram-type", 0x01); + mem->dimm_0_enable = fdtdec_get_bool(blob, node, + "fsp,dimm-0-enable"); + mem->dimm_1_enable = fdtdec_get_bool(blob, node, + "fsp,dimm-1-enable"); + mem->dimm_width = fdtdec_get_int(blob, node, + "fsp,dimm-width", + 0x00); + mem->dimm_density = fdtdec_get_int(blob, node, + "fsp,dimm-density", + 0x01); + mem->dimm_bus_width = fdtdec_get_int(blob, node, + "fsp,dimm-bus-width", + 0x03); + mem->dimm_sides = fdtdec_get_int(blob, node, + "fsp,dimm-sides", + 0x00); + mem->dimm_tcl = fdtdec_get_int(blob, node, + "fsp,dimm-tcl", 0x09); + mem->dimm_trpt_rcd = fdtdec_get_int(blob, node, + "fsp,dimm-trpt-rcd", + 0x09); + mem->dimm_twr = fdtdec_get_int(blob, node, + "fsp,dimm-twr", 0x0A); + mem->dimm_twtr = fdtdec_get_int(blob, node, + "fsp,dimm-twtr", 0x05); + mem->dimm_trrd = fdtdec_get_int(blob, node, + "fsp,dimm-trrd", 0x04); + mem->dimm_trtp = fdtdec_get_int(blob, node, + "fsp,dimm-trtp", 0x05); + mem->dimm_tfaw = fdtdec_get_int(blob, node, + "fsp,dimm-tfaw", 0x14); + } + } } diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts index 9f8fa70..0ca7c3e 100644 --- a/arch/x86/dts/bayleybay.dts +++ b/arch/x86/dts/bayleybay.dts @@ -188,6 +188,46 @@ }; };
+ fsp { + compatible = "intel,baytrail-fsp"; + fsp,mrc-init-tseg-size = <0>; + fsp,mrc-init-mmio-size = <0x800>; + fsp,mrc-init-spd-addr1 = <0xa0>; + fsp,mrc-init-spd-addr2 = <0xa2>; + fsp,emmc-boot-mode = <2>; + fsp,enable-sdio; + fsp,enable-sdcard; + fsp,enable-hsuart1; + fsp,enable-spi; + fsp,enable-sata; + fsp,sata-mode = <1>; + fsp,enable-xhci; + fsp,enable-lpe; + fsp,lpss-sio-enable-pci-mode; + fsp,enable-dma0; + fsp,enable-dma1; + fsp,enable-i2c0; + fsp,enable-i2c1; + fsp,enable-i2c2; + fsp,enable-i2c3; + fsp,enable-i2c4; + fsp,enable-i2c5; + fsp,enable-i2c6; + fsp,enable-pwm0; + fsp,enable-pwm1; + fsp,igd-dvmt50-pre-alloc = <2>; + fsp,aperture-size = <2>; + fsp,gtt-size = <2>; + fsp,serial-debug-port-address = <0x3f8>; + fsp,serial-debug-port-type = <1>; + fsp,mrc-debug-msg; + fsp,scc-enable-pci-mode; + fsp,os-selection = <4>; + fsp,emmc45-ddr50-enabled; + fsp,emmc45-retune-timer-value = <8>; + fsp,enable-igd; + }; + microcode { update@0 { #include "microcode/m0230671117.dtsi" diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index 9527233..4c9e265 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -122,6 +122,64 @@ 0x01000000 0x0 0x2000 0x2000 0 0xe000>; };
+ fsp { + compatible = "intel,baytrail-fsp"; + fsp,mrc-init-tseg-size = <0>; + fsp,mrc-init-mmio-size = <0x800>; + fsp,mrc-init-spd-addr1 = <0xa0>; + fsp,mrc-init-spd-addr2 = <0xa2>; + fsp,emmc-boot-mode = <2>; + fsp,enable-sdio; + fsp,enable-sdcard; + fsp,enable-hsuart1; + fsp,enable-spi; + fsp,enable-sata; + fsp,sata-mode = <1>; + fsp,enable-xhci; + fsp,enable-lpe; + fsp,lpss-sio-enable-pci-mode; + fsp,enable-dma0; + fsp,enable-dma1; + fsp,enable-i2c0; + fsp,enable-i2c1; + fsp,enable-i2c2; + fsp,enable-i2c3; + fsp,enable-i2c4; + fsp,enable-i2c5; + fsp,enable-i2c6; + fsp,enable-pwm0; + fsp,enable-pwm1; + fsp,igd-dvmt50-pre-alloc = <2>; + fsp,aperture-size = <2>; + fsp,gtt-size = <2>; + fsp,serial-debug-port-address = <0x3f8>; + fsp,serial-debug-port-type = <1>; + fsp,mrc-debug-msg; + fsp,scc-enable-pci-mode; + fsp,os-selection = <4>; + fsp,emmc45-ddr50-enabled; + fsp,emmc45-retune-timer-value = <8>; + fsp,enable-igd; + fsp,enable-memory-down; + fsp,memory-down-params { + compatible = "intel,baytrail-fsp-mdp"; + fsp,dram-speed = <1>; + fsp,dram-type = <1>; + fsp,dimm-0-enable; + fsp,dimm-width = <1>; + fsp,dimm-density = <2>; + fsp,dimm-bus-width = <3>; + fsp,dimm-sides = <0>; + fsp,dimm-tcl = <0xb>; + fsp,dimm-trpt-rcd = <0xb>; + fsp,dimm-twr = <0xc>; + fsp,dimm-twtr = <6>; + fsp,dimm-trrd = <6>; + fsp,dimm-trtp = <6>; + fsp,dimm-tfaw = <0x14>; + }; + }; + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt new file mode 100644 index 0000000..b44b5b5 --- /dev/null +++ b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt @@ -0,0 +1,158 @@ +Intel Bay Trail FSP UPD Binding +=============================== + +The device tree node which describes the overriding of the Intel Bay Trail FSP +UPD data for configuring the SoC. + +All properties can be found within the `upd-region` struct in +arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in +Intel's FSP Binary Configuration Tool for Bay Trail. This list of properties is +matched up to Intel's E3800 FSPv4 release. + +# Boolean properties: + +- fsp,enable-sdio +- fsp,enable-sdcard +- fsp,enable-hsuart0 +- fsp,enable-hsuart1 +- fsp,enable-spi +- fsp,enable-sata +- fsp,enable-azalia +- fsp,enable-xhci +- fsp,enable-lpe +- fsp,lpss-sio-enable-pci-mode +- fsp,enable-dma0 +- fsp,enable-dma1 +- fsp,enable-i2-c0 +- fsp,enable-i2-c1 +- fsp,enable-i2-c2 +- fsp,enable-i2-c3 +- fsp,enable-i2-c4 +- fsp,enable-i2-c5 +- fsp,enable-i2-c6 +- fsp,enable-pwm0 +- fsp,enable-pwm1 +- fsp,enable-hsi +- fsp,mrc-debug-msg +- fsp,isp-enable +- fsp,scc-enable-pci-mode +- fsp,igd-render-standby +- fsp,txe-uma-enable +- fsp,emmc45-ddr50-enabled +- fsp,emmc45-hs200-enabled +- fsp,enable-igd +- fsp,enable-memory-down + +If you set "fsp,enable-memory-down" you are strongly encouraged to provide an +"fsp,memory-down-params{};" to specify how your memory is configured. If you do +not set "fsp,enable-memory-down", then the DIMM SPD information will be +discovered by the FSP and used to setup main memory. + + +# Integer properties: + +- fsp,mrc-init-tseg-size +- fsp,mrc-init-mmio-size +- fsp,mrc-init-spd-addr1 +- fsp,mrc-init-spd-addr2 +- fsp,emmc-boot-mode +- fsp,sata-mode +- fsp,igd-dvmt50-pre-alloc +- fsp,aperture-size +- fsp,gtt-size +- fsp,serial-debug-port-address +- fsp,serial-debug-port-type +- fsp,os-selection +- fsp,emmc45-retune-timer-value + +- fsp,memory-down-params { + + # Boolean properties: + + - fsp,dimm-0-enable + - fsp,dimm-1-enable + + # Integer properties: + + - fsp,dram-speed + - fsp,dram-type + - fsp,dimm-width + - fsp,dimm-density + - fsp,dimm-bus-width + - fsp,dimm-sides + - fsp,dimm-tcl + - fsp,dimm-trpt-rcd + - fsp,dimm-twr + - fsp,dimm-twtr + - fsp,dimm-trrd + - fsp,dimm-trtp + - fsp,dimm-tfaw +}; + + +Example (from MinnowMax Dual Core): +----------------------------------- + +/ { + ... + + fsp { + compatible = "intel,baytrail-fsp"; + fsp,mrc-init-tseg-size = <0>; + fsp,mrc-init-mmio-size = <0x800>; + fsp,mrc-init-spd-addr1 = <0xa0>; + fsp,mrc-init-spd-addr2 = <0xa2>; + fsp,emmc-boot-mode = <2>; + fsp,enable-sdio; + fsp,enable-sdcard; + fsp,enable-hsuart1; + fsp,enable-spi; + fsp,enable-sata; + fsp,sata-mode = <1>; + fsp,enable-xhci; + fsp,enable-lpe; + fsp,lpss-sio-enable-pci-mode; + fsp,enable-dma0; + fsp,enable-dma1; + fsp,enable-i2c0; + fsp,enable-i2c1; + fsp,enable-i2c2; + fsp,enable-i2c3; + fsp,enable-i2c4; + fsp,enable-i2c5; + fsp,enable-i2c6; + fsp,enable-pwm0; + fsp,enable-pwm1; + fsp,igd-dvmt50-pre-alloc = <2>; + fsp,aperture-size = <2>; + fsp,gtt-size = <2>; + fsp,serial-debug-port-address = <0x3f8>; + fsp,serial-debug-port-type = <1>; + fsp,mrc-debug-msg; + fsp,scc-enable-pci-mode; + fsp,os-selection = <4>; + fsp,emmc45-ddr50-enabled; + fsp,emmc45-retune-timer-value = <8>; + fsp,enable-igd; + fsp,enable-memory-down; + fsp,memory-down-params { + compatible = "intel,baytrail-fsp-mdp"; + fsp,dram-speed = <1>; + fsp,dram-type = <1>; + fsp,dimm-0-enable; + fsp,dimm-width = <1>; + fsp,dimm-density = <2>; + fsp,dimm-bus-width = <3>; + fsp,dimm-sides = <0>; + fsp,dimm-tcl = <0xb>; + fsp,dimm-trpt-rcd = <0xb>; + fsp,dimm-twr = <0xc>; + fsp,dimm-twtr = <6>; + fsp,dimm-trrd = <6>; + fsp,dimm-trtp = <6>; + fsp,dimm-tfaw = <0x14>; + }; + }; + + ... +}; diff --git a/include/fdtdec.h b/include/fdtdec.h index 4b3f8d1..987d51a 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -186,6 +186,8 @@ enum fdt_compat_id { COMPAT_SOCIONEXT_XHCI, /* Socionext UniPhier xHCI */ COMPAT_INTEL_PCH, /* Intel PCH */ COMPAT_INTEL_IRQ_ROUTER, /* Intel Interrupt Router */ + COMPAT_INTEL_BAYTRAIL_FSP, /* Intel Bay Trail FSP */ + COMPAT_INTEL_BAYTRAIL_FSP_MDP, /* Intel Bay Trail FSP memory-down params */
COMPAT_COUNT, }; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 48667ef..42e8a8b 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -78,6 +78,8 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(SOCIONEXT_XHCI, "socionext,uniphier-xhci"), COMPAT(COMPAT_INTEL_PCH, "intel,bd82x6x"), COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"), + COMPAT(COMPAT_INTEL_BAYTRAIL_FSP, "intel,baytrail-fsp"), + COMPAT(COMPAT_INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"), };
const char *fdtdec_get_compatible(enum fdt_compat_id id)