On Tue, 2017-09-26 at 16:34 -0500, Dinh Nguyen wrote:
On Tue, Sep 19, 2017 at 4:22 AM, chin.liang.see@intel.com wrote:
From: Chin Liang See chin.liang.see@intel.com
Device tree for Stratix10 SoC
Signed-off-by: Chin Liang See chin.liang.see@intel.com
arch/arm/dts/Makefile | 3 +- arch/arm/dts/socfpga_stratix10_socdk.dts | 141 +++++++++++++++++++++++++++++++ 2 files changed, 143 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/socfpga_stratix10_socdk.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index fee4680..4cf5fd0 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -171,7 +171,8 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_cyclone5_sr1500.dtb \ - socfpga_cyclone5_vining_fpga.dtb + socfpga_cyclone5_vining_fpga.dtb \ + socfpga_stratix10_socdk.dtb
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \ dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts new file mode 100644 index 0000000..484c630 --- /dev/null +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts @@ -0,0 +1,141 @@ +/*
- Copyright (C) 2016-2017 Intel Corporation <www.intel.com>
- SPDX-License-Identifier: GPL-2.0
- */
+/dts-v1/; +#include "skeleton.dtsi" +#include <dt-bindings/reset/altr,rst-mgr-s10.h>
You don't add the patch for this include file until patch 4/14, which means the build will fail until patch 4 is applied. You need to move this patch after 4/14.
Yes, good catch. Let shuffle this
+/ { + model = "Intel SOCFPGA Stratix 10 SoC Development Kit"; + compatible = "altr,socfpga-stratix10", "altr,socfpga";
+ #address-cells = <1>; + #size-cells = <1>;
+ chosen { + bootargs = "console=ttyS0,115200"; + };
+ aliases { + ethernet0 = &gmac0; + spi0 = &qspi; + };
+ memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + };
+ regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + };
+ soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + ranges; + u-boot,dm-pre-reloc;
+ rst: rstmgr@ffd11000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd11000 0x100>; + altr,modrst-offset = <0x20>; + };
+ gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 90 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + max-speed = <1000>; + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */
These are PHY properties, which should be in a separate PHY node.
Let me check on the PHY driver
Chin Liang
Dinh